>

MOT History from tests of petrol HONDA CBR125Rs year 2006

Review the list of common HONDA CBR125R failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:67.28%
(The average a petrol HONDA CBR125R year 2006 passes without issue)
Based on:3,362 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment169
Drive chain excessively loose |6.2.1d|128
Front Roller brake test indicates a binding brake |3.3.A1a|100
Rear Roller brake test indicates a binding brake |3.3.A1a|73
Registration plate issues57
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||54
Drive chain worn to excess |6.2.1e|49
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|45
Steering movement excessively `notchy` with the wheel raised |2.2.1b|38
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|37
Stop lamp does not illuminate immediately a brake applies |1.3.1a|35
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|31
Steering headbearing has excessive free play |2.2.2|30
Rear Drive chain sprocket worn to excess |6.2.1e|28
Wheel alignment incorrect which adversely affects the handling |2.5.1|27
Drive chain excessively tight |6.2.1d|27
Exhaust is leaking and excessively noisey |7.1.1b|25
Headlamp insecure |1.2.3b|23
Offside Front shock absorber seal failed and leaking oil |2.3.3|23
Nearside Front shock absorber seal failed and leaking oil |2.3.3|23
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|23
Riders seat insecure |6.2.1a|22
Rear wheel bearings have excessive free play |2.4.A.2c|21
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|20
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||20
Rear Floor brake test indicates a binding brake |3.3.C2c|18
Front Brake lever cannot be applied smoothly |3.1.3d|18
Front position lamp does not illuminate immediately when switched on |1.1.3a|18
Front Floor brake test indicates a binding brake |3.3.C2c|17
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|17
Rear Brake excessively binding (1.2.1 (f))17
Offside Handlebar deformed |2.1.1b|17
Horn not working |1.7.3a|16
Rear reflector on motorcycle missing |1.4.1|16
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|14
Throttle operating incorrectly |6.2.1f|13
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|13
Front Brake excessively binding (1.2.1 (f))12
Nearside Handlebar deformed |2.1.1b|12
Stop lamp remains on when the brake is released |1.3.1e|12
Headlamp not working on dipped beam (4.1.1 (a) (ii))11
Rear Drive chain excessively loose |6.2.1d|11
Nearside Front Direction indicator not working |1.5.1c|10
Front wheel bearings have excessive free play |2.3.5b|10
Registration plate lamp issues10
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|10
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|10
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|9
Nearside Front Direction indicators not working |1.5.1c|9
Offside Front Direction indicator not working |1.5.1c|9
Nearside Rear Footrest missing |6.2.1a|9
Horn not working (7.7 (a) (ii))9
Headlamp not working on dipped beam |4.1.1 |a| |ii||8
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|8
Front Roller brake test indicates a sticking brake |3.3.A1a|8
Front shock absorber seal failed and leaking oil |2.3.3|8
Offside Front Direction indicator insecure |1.5.3b|8
Rear Drive chain worn to excess |6.2.1e|8
Drive chain sprocket worn to excess |6.2.1e|8
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d|8
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))8
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|8
Front Brake excessively binding |1.2.1 |f||8
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|8
Offside Rear Footrest missing |6.2.1a|8
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||8
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|7
Handlebar deformed |2.1.1b|7
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|7
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|7
Rear Rear wheel bearings have excessive free play |2.4.A.2c|7
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||7
Headlamp aim not tested (4.1.2 (b))7
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|6
Drive chain excessively loose (6.1.7 (c) (i))6
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))6
Drive chain sprocket carrier worn to excess |6.2.1e|6
Headlamp aim beam image kick up to the offside |1.6|6
Stop lamp remains on when the brakes are released6
Direction indicators not working |1.5.1c|6
Rear Roller brake test indicates a sticking brake |3.3.A1a|6
Front Valve stem seriously damaged (5.2.3 (j))6
Front Brake disc|s| is excessively distorted |3.2.A1m|6
Front Front wheel bearings have excessive free play |2.3.5b|6
Headlamp aim headlamp deteriorated and function impaired |1.2.3a|6
Offside Rear Direction indicator not working |1.5.1c|6
Front Brake disc|s| has excessive run out |3.2.A1m|6
Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c|5
Drive chain excessively loose |6.1.7 |c| |i||5
Headlamp switch faulty |1.2.4|5
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))5
Front Roller brake test indicates a severely grabbing brake |3.3.A1b|5
Brake lever cannot be applied smoothly |3.1.3d|5
Front Front shock absorber seal failed and leaking oil |2.3.3|5
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))5
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|5
Front Drive chain sprocket worn to excess |6.2.1e|5
Front Steering headbearing has excessive free play |2.2.2|5
All direction indicators not working (4.4.1 (a) (ii))5
Nearside Rear Direction indicator insecure |1.5.3b|5
Drive chain so loose it is likely to fail (6.1.7 (c) (ii))5
Exhaust excessively deteriorated |7.1.1a|5
Headlamp aim not tested |4.1.2 |b||5
Indicator tell tale not functioning |1.5.2|5
Wheel alignment incorrect which adversely affects the steering |2.5.1|5
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||5
Front Wheel has an excessively distorted bead rim. |4.2.2|5
Nearside Rear Direction indicator incorrect colour |1.5.1b|4
Headlamp not working on main beam |4.1.1 |a| |ii||4
Front suspension has excessive stiffness in the suspension movement. |2.3.6b|4
Rear Footrest missing |6.2.1a|4
Horn not working (7.7 (a))4
Nearside Front Direction indicator not working (4.4.1 (a) (ii))4
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c|4
An item not tested |Manual|4
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))4
Fuel system component insecure |7.2.1b|4
Front Floor brake test indicates a sticking brake |3.3.C2c|4
Clutch lever shortened so it cannot be readily operated. |6.2.1g|4
Nearside Front Footrest insecure |6.2.1a|4
Rear Brake disc|s| has excessive run out |3.2.A1m|4
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))4
Rear Drive chain excessively loose (6.1.7 (c) (i))4
Drive chain worn to excess (6.1.7 (c) (i))4
Nearside Front Direction indicator missing |1.5.1a|4
Nearside Rear Direction indicator missing |1.5.1a|4
Nearside Front Direction indicator insecure |1.5.3b|4
Headlamp aim not tested |1.6|4
Front Exhaust is leaking and excessively noisey |7.1.1b|4
Steering control handlebar movement restricted by trapped cables |2.1.2c|4
Front Stop lamp not working (4.3.1 (a) (ii))4
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))4
Clutch lever positioned so it cannot be readily operated. |6.2.1g|4
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b|4
Direction indicators flashing less than 60 times a minute |1.5.1c|4
Front Headlamp insecure (4.1.1 (c))4
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|4

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy