Most common failures | No# failures |
---|
Headlamp aim out of alignment | 33 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 20 |
Rear reflector on motorcycle missing |1.4.1| | 17 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Throttle operating incorrectly |6.2.1f| | 13 |
Front wheel bearings have excessive free play |2.3.5b| | 12 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Registration plate issues | 10 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 10 |
Drive chain excessively loose |6.2.1d| | 10 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 9 |
Exhaust is leaking and excessively noisey |7.1.1b| | 9 |
Drive chain excessively tight |6.2.1d| | 8 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Front Front wheel bearings have excessive free play |2.3.5b| | 5 |
Horn not working |1.7.3a| | 5 |
Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 3 |
Rear Brake disc|s| cracked |3.2.A1g| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 2 |
Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Hydraulic brake control creeps under load. |3.1.4a| | 2 |
Front Brake cylinder insecurely mounted |3.2.B1a| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Nearside Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Brake excessively binding |1.2.1 |f|| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Position lamp not working Tailight (4.2.1 (a)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Steering headbearing excessively stiff or notchy Notchy (2.2.2 (f) (i)) | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Headlamp switch insecure |1.2.4| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Rear An item not tested |Manual| | 1 |
Plate brake test No brake control achieves an efficiency of 30%. |3.3.B2a| | 1 |
Plate brake test Neither brake control achieves an efficiency of 25% |3.3.B2b| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Offside Steering lock stop maladjusted |2.1.3| | 1 |
Front Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |
Brake hose damaged | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Stop lamp does not illuminate immediately a brake applies with rear control |1.3.1a| | 1 |
Front Steering lock stop maladjusted |2.1.3| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Offside Exhaust excessively deteriorated |7.1.1a| | 1 |
Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Lower Brake linked system has an excessively worn caliper pivot. |3.2.B5| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Offside Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Offside Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Front Brake component defective due to a deliberate modification which significantly reduces the original strength front calipers have been fitted incorrectly and worn the shoulder have realigned the calipers to there correct position |3.1.5| | 1 |
Handlebar excessively corroded |2.1.1b| | 1 |
Lower Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
An item not tested |Manual| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Brake component is excessively corroded |3.1.5| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Offside Suspension attachment bracket/mounting insecure |5.3.3 |a| |i|| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front wheel spindle loose |2.3.5a| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Centre Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Stop lamp not working front brake switch (4.3.1 (a) (ii)) | 1 |
All direction indicators not working replaced blown fuse (4.4.1 (a) (ii)) | 1 |
Stop lamp not working from front brake lever (4.3.1 (a) (ii)) | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Stop lamp not working Rear brake pedal switch not operating stop lamp. (4.3.1 (a) (ii)) | 1 |
Central Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
Offside Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort pedalsticking |3.3.A1c| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies rear stop light with footbrake pedal |1.3.1a| | 1 |
Front Exhaust is leaking and excessively noisey and rear |7.1.1b| | 1 |
Rear Brake caliper insecurely mounted and braking performance affected brake reaction bar (1.1.16 (c) (ii)) | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Offside Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Nearside Rear Motorcycle structure cracked |6.1.1a| | 1 |
Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Inner Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Wheel bearing play so excessive it is likely to break up rear wheel sprocket carrier bearing |5.1.3 |a| |ii|| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Indicator tell tale not operating correctly |1.5.2| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Central Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Nearside Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Offside Front Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Nearside Front Brake reaction bracket excessively worn (1.1.15 (b)) | 1 |
Nearside Front Brake pivot excessively worn (1.1.15 (b)) | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Centre Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Front Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Front Front position lamp missing |1.1.1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Offside Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Rear Brake grabbing severely |1.2.1 |c|| | 1 |
Nearside Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Nearside Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Central Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Horn replaced by a siren |1.7.3b| | 1 |
Nearside Front Position lamp switch faulty |1.1.4a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Brake disc|s| insecure |3.2.A1g| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Outer Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Front Brake grabbing severely |1.2.1 |c|| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |