MOT History from tests of petrol HONDA CBR1000s year 1994

Review the list of common HONDA CBR1000 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history

Pass percent:85.14%

(The average a petrol HONDA CBR1000 year 1994 passes without issue)

Based on:222 MOT Tests

Most common failures	No# failures
Rear reflector on motorcycle missing \|1.4.1\|	4
Registration plate issues	3
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Drive chain excessively loose \|6.2.1d\|	2
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Exhaust is leaking and excessively noisey \|7.1.1b\|	2
Rear Drive chain sprocket worn to excess \|6.2.1e\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2
Upper Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
Nearside Handlebar grip insecure to handlebar \|2.2.1 \|d\| \|ii\|\|	1
Nearside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	1
Offside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	1
Front Stop lamp not working (4.3.1 (a) (ii))	1
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Front Front wheel bearings have excessive free play \|2.3.5b\|	1
Front Brake disc\|s\| cracked \|3.2.A1g\|	1
Front Brake caliper\|s\| securing bolt\|s\| loose \|3.2.A1j\|	1
Offside Rear Direction indicator not working \|1.5.1c\|	1
Drive chain sprocket carrier worn to excess \|6.2.1e\|	1
Offside Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Horn not working \|1.7.3a\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	1
Front Drive chain sprocket worn to excess \|6.2.1e\|	1
Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Headlamp aim out of alignment	1
Nearside Rear Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Rear reflector on motorcycle missing \|1.4.1\|	4
Registration plate issues	3
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Drive chain excessively loose \|6.2.1d\|	2
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Exhaust is leaking and excessively noisey \|7.1.1b\|	2
Rear Drive chain sprocket worn to excess \|6.2.1e\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2
Upper Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
Nearside Handlebar grip insecure to handlebar \|2.2.1 \|d\| \|ii\|\|	1
Nearside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	1
Offside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	1
Front Stop lamp not working (4.3.1 (a) (ii))	1
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Front Front wheel bearings have excessive free play \|2.3.5b\|	1
Front Brake disc\|s\| cracked \|3.2.A1g\|	1
Front Brake caliper\|s\| securing bolt\|s\| loose \|3.2.A1j\|	1
Offside Rear Direction indicator not working \|1.5.1c\|	1
Drive chain sprocket carrier worn to excess \|6.2.1e\|	1
Offside Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Horn not working \|1.7.3a\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	1
Front Drive chain sprocket worn to excess \|6.2.1e\|	1
Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Headlamp aim out of alignment	1
Nearside Rear Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1

MOT History from tests of petrol HONDA CBR1000s year 1994

Find us on Facebook