>

MOT History from tests of petrol HONDA CBRs year 2006

Review the list of common HONDA CBR failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:83.02%
(The average a petrol HONDA CBR year 2006 passes without issue)
Based on:18,005 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment423
Registration plate issues260
Drive chain excessively loose |6.2.1d|198
Rear reflector on motorcycle missing |1.4.1|172
Front Roller brake test indicates a binding brake |3.3.A1a|138
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|117
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||112
Drive chain worn to excess |6.2.1e|98
Rear Roller brake test indicates a binding brake |3.3.A1a|90
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|89
Stop lamp does not illuminate immediately a brake applies |1.3.1a|76
Horn not working |1.7.3a|71
Registration plate lamp issues63
Rear Drive chain sprocket worn to excess |6.2.1e|62
Offside Front shock absorber seal failed and leaking oil |2.3.3|59
Nearside Front shock absorber seal failed and leaking oil |2.3.3|58
Steering movement excessively `notchy` with the wheel raised |2.2.1b|55
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|54
Steering headbearing has excessive free play |2.2.2|48
Front wheel bearings have excessive free play |2.3.5b|42
Drive chain excessively tight |6.2.1d|42
Front Floor brake test indicates a binding brake |3.3.C2c|33
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|32
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|32
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||32
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))31
Front position lamp does not illuminate immediately when switched on |1.1.3a|31
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|31
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))29
Wheel alignment incorrect which adversely affects the handling |2.5.1|27
Exhaust is leaking and excessively noisey |7.1.1b|27
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|26
Front Brake excessively binding (1.2.1 (f))26
Rear reflector missing (4.8.2 (a) (ii))26
Riders seat insecure |6.2.1a|24
Offside Handlebar deformed |2.1.1b|24
Front Stop lamp not working (4.3.1 (a) (ii))23
Rear Drive chain excessively loose |6.2.1d|23
Rear wheel bearings have excessive free play |2.4.A.2c|22
Front shock absorber seal failed and leaking oil |2.3.3|22
Stop lamp remains on when the brakes are released21
Rear Brake excessively binding (1.2.1 (f))21
Nearside Front Direction indicator insecure |1.5.3b|21
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|21
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|19
Front wheel bearings are excessively rough |2.3.5b|19
Nearside Rear Footrest missing |6.2.1a|19
Offside Front Direction indicator not working |1.5.1c|19
Front Roller brake test indicates a sticking brake |3.3.A1a|19
Rear Rear reflector on motorcycle missing |1.4.1|19
Drive chain excessively loose (6.1.7 (c) (i))18
Offside Front Direction indicators not working |1.5.1c|18
Rear Stop lamp remains on when the brake is released |1.3.1e|18
Stop lamp remains on when the brake is released |1.3.1e|17
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||17
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|17
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|17
Front Brake lever cannot be applied smoothly |3.1.3d|17
Headlamp insecure |1.2.3b|17
Offside Front Direction indicator insecure |1.5.3b|17
Wheel alignment incorrect which adversely affects the steering |2.5.1|16
Headlamp not working on dipped beam (4.1.1 (a) (ii))16
Front Valve stem seriously damaged (5.2.3 (j))16
Nearside Rear Direction indicators not working |1.5.1c|16
Rear reflector missing |4.8.2 |a| |ii||16
Rear position lamp adversely affected by the operation of another lamp |1.1.3b|15
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|15
Rear Floor brake test indicates a binding brake |3.3.C2c|15
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|15
Nearside Handlebar deformed |2.1.1b|15
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||15
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))15
Nearside Front Direction indicator not working |1.5.1c|15
Nearside Front Direction indicators not working |1.5.1c|14
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))14
Headlamp aim beam image kick up to the offside |1.6|14
Front Drive chain sprocket worn to excess |6.2.1e|14
Stop lamp affected by the operation of another lamp |1.3.2|14
Direction indicators not working |1.5.1c|14
Front Brake disc|s| has excessive run out |3.2.A1m|14
Direction indicators flashing more than 120 times per minute |1.5.1c|14
Offside Rear Direction indicators not working |1.5.1c|14
Rear Valve stem seriously damaged (5.2.3 (j))13
Front Shock absorber has a serious fluid leak (5.3.2 (b))13
Offside Rear Footrest missing |6.2.1a|13
Headlamp aim not tested |1.6|13
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|13
Front Floor brake test indicates a sticking brake |3.3.C2c|13
Nearside Rear Direction indicator not working |1.5.1c|13
Rear Brake excessively binding |1.2.1 |f||13
Drive chain sprocket carrier worn to excess |6.2.1e|12
Offside Rear Direction indicator not working |1.5.1c|12
Nearside Front Direction indicator not working (4.4.1 (a) (ii))12
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))12
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|11
Front Front wheel bearings have excessive free play |2.3.5b|11
Horn not working (7.7 (a) (ii))11
Front Steering headbearing has excessive free play |2.2.2|11
Front Brake excessively binding |1.2.1 |f||11
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|11
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))10
Front Wheel bearing rough when rotated (5.1.3 (b) (i))10
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b||10
Horn not working |7.7 |a| |ii||10
Headlamp switch faulty |1.2.4|10
Exhaust mounting does not fully support the exhaust system |7.1.1.c|10

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy