Most common failures | No# failures |
---|
Headlamp aim out of alignment | 30 |
Rear reflector on motorcycle missing |1.4.1| | 21 |
Registration plate issues | 19 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 13 |
Front wheel bearings are excessively rough |2.3.5b| | 9 |
Throttle operating incorrectly |6.2.1f| | 7 |
Rear Rear reflector on motorcycle missing |1.4.1| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Steering headbearing has excessive free play |2.2.2| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Horn not working |1.7.3a| | 6 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Drive chain excessively loose |6.2.1d| | 6 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 6 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Nearside Rear Direction indicator not working |1.5.1c| | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 4 |
Rear Footrest missing |6.2.1a| | 4 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Rear Drive chain excessively loose |6.2.1d| | 3 |
Nearside Rear Footrest missing |6.2.1a| | 3 |
Offside Rear Footrest missing |6.2.1a| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
An item not tested |Manual| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Offside Front Footrest insecure |6.2.1a| | 3 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Rear Drive chain excessively tight |6.2.1d| | 2 |
Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Rear Exhaust has part of the system missing |7.1.1a| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 2 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 2 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Nearside Footrest insecure |6.2.1a| | 2 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Front Brake disc|s| cracked |3.2.A1g| | 2 |
Direction indicator not working |1.5.1c| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Offside Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear Brake disc|s| cracked |3.2.A1g| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Riders seat insecure |6.2.1a| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Offside Motorcycle structure excessively damaged |6.1.1a| | 1 |
Front Upper Exhaust has part of the system missing bolt missing |7.1.1a| | 1 |
Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
Front Horn control not functioning. |1.7.2b| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Offside Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Brake lever so insecure that the brake cannot be readily applied |1.1.2 |e| |ii|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Horn sound not in accordance with requirements |7.7 |c|| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Centre Rear Gradient brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.D1b| | 1 |
Horn missing |1.7.1| | 1 |
Front Wheel damaged significantly reducing the original strength |4.2.1a| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Nearside Front Brake hose which buldges |3.2.B4| | 1 |
Brake lever cannot be released smoothly |3.1.3d| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front shock absorber seal failed and leaking oil Left and right fork seals leaking |2.3.3| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Nearside Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Offside Front Brake component leaking fluid |3.2.B4| | 1 |
Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Handlebar deformed |2.1.1b| | 1 |
Rear Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Offside Front Brake lining|s| contaminated by oil or grease |3.2.A1k| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Wheel bearing rough when rotated Vibration felt through handlebars as wheel is turned (5.1.3 (b) (i)) | 1 |
Nearside Front Brake pipe excessively chafed |3.2.B2a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
Offside Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Offside Rear Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Stop lamp does not illuminate immediately a brake applies rear brake |1.3.1a| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars both directions |2.1.2b| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Steering control handlebar movement restricted by trapped cables throttle cable trapped between fork and radiator at full lock |2.1.2c| | 1 |
Nearside Front Brake caliper|s| insecure sliding pin boot missing/deteriorated causing excessive play in caliper mounting |3.2.A1j| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain rivet link not rivetted |6.2.1h| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Steering lock stop maladjusted |2.1.3| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
Nearside Rear Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Registration plate lamp issues | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Nearside Drive chain worn to excess |6.2.1e| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Central Rear Lower Suspension arm pin or bush excessively worn swingarm to lower shock mount bushing. (5.3.4 (a) (i)) | 1 |
Offside Front Throttle control functioning such that safe operation of the motorcycle is adversely affected cable split and not retracting safely. (6.2.7 (a) (ii)) | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Offside Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Nearside Front Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
Offside Front Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |