>

MOT History from tests of petrol HONDA CBRs year 1988

Review the list of common HONDA CBR failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:70.83%
(The average a petrol HONDA CBR year 1988 passes without issue)
Based on:1,080 MOT Tests
Most common failuresNo# failures
Rear reflector on motorcycle missing |1.4.1|44
Headlamp aim out of alignment42
Registration plate issues22
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|22
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|14
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|14
Front position lamp does not illuminate immediately when switched on |1.1.3a|13
Offside Front shock absorber seal failed and leaking oil |2.3.3|13
Stop lamp does not illuminate immediately a brake applies |1.3.1a|13
Front Roller brake test indicates a binding brake |3.3.A1a|13
Nearside Front shock absorber seal failed and leaking oil |2.3.3|12
Throttle operating incorrectly |6.2.1f|11
Steering movement excessively `notchy` with the wheel raised |2.2.1b|9
Front wheel bearings have excessive free play |2.3.5b|9
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||8
Front Floor brake test indicates a binding brake |3.3.C2c|8
Drive chain excessively loose |6.2.1d|8
Front Floor brake test indicates a sticking brake |3.3.C2c|7
Rear wheel bearings have excessive free play |2.4.A.2c|7
Exhaust is leaking and excessively noisey |7.1.1b|7
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||6
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|6
Headlamp aim beam image kick up to the offside |1.6|6
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|6
Steering headbearing has excessive free play |2.2.2|6
Front shock absorber seal failed and leaking oil |2.3.3|5
Rear Roller brake test indicates a binding brake |3.3.A1a|5
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|5
Front Front shock absorber seal failed and leaking oil |2.3.3|5
Offside Rear Direction indicator not working |1.5.1c|5
Front wheel bearings are excessively rough |2.3.5b|5
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|5
Front suspension has inadequate damping effect. |2.3.6c|4
Nearside Rear Footrest missing |6.2.1a|4
Horn not working |1.7.3a|4
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|4
Front Exhaust is leaking and excessively noisey |7.1.1b|4
Stop lamp remains on when the brake is released |1.3.1e|4
Nearside Front Direction indicator not working |1.5.1c|4
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|3
Offside Handlebar deformed |2.1.1b|3
Front Front wheel bearings are excessively rough |2.3.5b|3
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|3
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|3
Fairings insecure and likely to impede the steering |2.1.2e|3
Offside Front Direction indicator not working |1.5.1c|3
Rear Drive chain sprocket worn to excess |6.2.1e|3
Offside Rear Footrest missing |6.2.1a|3
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|3
Rear Drive chain excessively loose |6.2.1d|3
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|3
Steering control handlebar movement restricted by trapped cables |2.1.2c|3
Nearside Steering lock stop ineffective |2.1.3|3
Nearside Front Footrest insecure |6.2.1a|3
Offside Front Footrest insecure |6.2.1a|3
Drive chain worn to excess |6.2.1e|3
Rear Rear reflector on motorcycle missing |1.4.1|3
Front Front suspension has inadequate damping effect. |2.3.6c|3
Offside Direction indicators flashing more than 120 times per minute |1.5.1c|3
Rear Rear wheel bearings have excessive free play |2.4.A.2c|3
Drive chain sprocket carrier worn to excess |6.2.1e|3
Offside Steering lock stop ineffective |2.1.3|3
Front Roller brake test indicates a sticking brake |3.3.A1a|3
Nearside Rear Direction indicators not working |1.5.1c|3
Front Wheel has an excessively distorted bead rim. |4.2.2|2
Front Roller brake test indicates a severely grabbing brake |3.3.A1b|2
Offside Headlamp aim headlamp deteriorated and function impaired |1.2.3a|2
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|2
Offside Rear Direction indicators not working |1.5.1c|2
Wheel alignment incorrect which adversely affects the steering |2.5.1|2
Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|2
Offside Footrest insecure |6.2.1a|2
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|2
Exhaust excessively deteriorated |7.1.1a|2
Rear reflector missing (4.8.2 (a) (ii))2
Wheel alignment incorrect which adversely affects the handling |2.5.1|2
Exhaust mounting does not fully support the exhaust system |7.1.1.c|2
Exhaust markings indicating not for road use or similar wording |7.1.4|2
Rear Brake disc|s| cracked |3.2.A1g|2
Direction indicators flashing more than 120 times per minute |1.5.1c|2
Riders seat insecure |6.2.1a|2
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|2
Front Horn not working |1.7.3a|2
Front Front wheel bearings have excessive free play |2.3.5b|2
Rear Brake disc|s| excessively worn |3.2.A1l|2
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|2
Rear Drive chain sprocket carrier worn to excess |6.2.1e|2
Nearside Footrest insecure |6.2.1a|2
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b|2
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Rear Brake disc|s| excessively scored |3.2.A1l|2
Headlamp aim headlamp deteriorated and function impaired |1.2.3a|2
Drive chain excessively tight |6.2.1d|2
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|2
Direction indicators not working |1.5.1c|2
Stop lamp missing |1.3.3a|1
Rear Brake excessively binding (1.2.1 (f))1
Front Brake excessively binding (1.2.1 (f))1
Front Valve stem seriously damaged (5.2.3 (j))1
Drive chain excessively tight (6.1.7 (k) (i))1
Offside Headlamp insecure (1.2.3b)1
Steering movement excessively notchy with the wheel raised (2.2.1b)1
Front wheel bearings are excessively rough (2.3.5b)1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)1
Fuel system component leaking |7.2.1a|1
Offside Front Direction indicator not working (4.4.1 (a) (ii))1
Front Fairings insecure and likely to impede the steering |2.1.2e|1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Brake master cylinder leaking hydraulic fluid |3.2.B1e|1
Front Front mudguard insecure |2.3.7|1
Nearside Front suspension assembly component loose |2.3.1|1
Offside Front suspension assembly component loose |2.3.1|1
Nearside Front suspension assembly component missing |2.3.1|1
Nearside Headlamp aim headlamp deteriorated and function impaired |1.2.3a|1
Nearside Front wheel spindle securing nut locking device insecure |2.3.3a|1
Nearside Front position lamp insecure |1.1.1c|1
Offside Front position lamp insecure |1.1.1c|1
Centre Rear Stop lamp does not emit a steady light |1.3.1b|1
Rear Brake disc|s| is excessively distorted |3.2.A1m|1
An item not tested |Manual|1
Nearside Front Brake component cracked and seriously reduced in strength |3.2.A1|1
Offside Front Brake component cracked and seriously reduced in strength |3.2.A1|1
Offside Rear Brake component cracked and seriously reduced in strength |3.2.A1|1
Horn control not functioning. |1.7.2b|1
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a|1
Front Headlamp incorrect colour |1.2.1|1
Offside Rear Footrest insecure |6.2.1a|1
Rear Drive chain worn to excess |6.2.1e|1
Horn not working (7.7 (a) (ii))1
Central Rear Position lamp not working (4.2.1 (a))1
Shock absorber has a serious fluid leak Both front (5.3.2 (b))1
Centre Front Fairings insecure and likely to impede the steering |2.1.2e|1
Rear Footrest missing |6.2.1a|1
Front Stop lamp not working (4.3.1 (a) (ii))1
Nearside Front Position lamp not working (4.2.1 (a))1
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Front Brake disc|s| excessively pitted |3.2.A1l|1
Nearside Front Headlamp damaged and function impaired |1.2.3a|1
Offside Front Headlamp damaged and function impaired |1.2.3a|1
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Lower Rear suspension component loose |2.4.A.1a|1
Direction indicator flashing more than 120 times per minute all indicaters |1.5.1c|1
Headlamp aim so that beam "kick up" is not visible on the screen suspect one bulb might be in wrong and dip and main might be mixed up on switch |1.6.B.1|1
Rear Stop lamp does not illuminate immediately a brake applies foot brake |1.3.1a|1
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c|1
Front Brake lever attachment screws missing |3.1.2b|1
Nearside Indicator tell tale not functioning |1.5.2|1
Offside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j|1
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j|1
Handlebar handgrip not secure to handlebars. |2.1.1c|1
Roller brake test indicates a binding brake |3.3.A1a|1
Centre Rear Upper Rear reflector on motorcycle incorrectly positioned |1.4.2d|1
Offside Outer Front Lower Front wheel bearings have excessive free play |2.3.5b|1
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c|1
Front Headlamp main beam affected by the operation of another lamp |1.2.2c|1
Stop lamp not working (4.3.1 (a) (ii))1
Nearside Front Steering lock stop ineffective |2.1.3|1
Front Steering movement excessively stiff with the wheel raised |2.2.1b|1
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c|1
Front Brake lagging in operation clean brake dust of new pads. sorted. |1.2.1 |d||1
Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii||1
Front Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|1
Front Riders seat insecure |6.2.1a|1
Throttle operating incorrectly sticking |6.2.1f|1
Front Brake disc|s| excessively worn Both |3.2.A1l|1
Rear Drive chain excessively tight |6.2.1d|1
Front Fairing insecure and likely to impede the steering |2.1.2e|1
Offside Headlamp aim headlamp damaged and function impaired |1.2.3a|1
Nearside Rear Footrest insecure |6.2.1a|1
Rear position lamp incorrect colour |1.1.2b|1
Stop lamp emits other than a steady red light |1.3.1b|1
Front mudguard can easily contact the wheel |2.3.7|1
Upper Steering headbearing has excessive free play |2.2.2|1
Front Fairing so located that it is likely to impede the steering |2.1.2e|1
Rear reflector on motorcycle insecure |1.4.2c|1
Front wheel spindle securing nut locking device missing |2.3.3a|1
Exhaust mounting missing |7.1.1c|1
Front wheel spindle securing nut locking device insecure |2.3.5a|1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|1
Offside Front Brake pipe union leaking fluid |3.2.B4|1
Rear Brake pipe excessively damaged |3.2.B2a|1
Front Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Drive chain excessively loose (6.1.7 (c) (i))1
Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Front Footrest insecure |6.2.1a|1
Front Handlebar handgrip not secure to handlebars. |2.1.1c|1
Footrest missing |6.2.1a|1
Nearside Rear Direction indicator insecure |1.5.3b|1
Front Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a|1
Brake lever cracked |3.1.2c|1
Horn not working |7.7 |a| |ii||1
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Centre Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Front Brake grabbing severely (1.2.1 (c))1
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b|1
Front Direction indicator not working |1.5.1c|1
Rear Direction indicator not working |1.5.1c|1
Front Headlamp aim headlamp damaged and function impaired |1.2.3a|1
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Rear reflector on motorcycle incorrectly positioned |1.4.2d|1
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))1
Centre Rear Rear reflector on motorcycle missing |1.4.1|1
Centre Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
Nearside Front Brake disc|s| cracked |3.2.A1g|1
Offside Front Brake disc|s| cracked |3.2.A1g|1
Centre Front Roller brake test indicates a binding brake |3.3.A1a|1
Nearside Rear Drive chain excessively loose |6.2.1d|1
Front Steering headbearing has excessive free play |2.2.2|1
Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Rear reflector on motorcycle obscured |1.4.1|1
Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Offside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Steering movement excessively stiff with the wheel raised |2.2.1b|1
Rear Brake pedal pivots excessively worn |3.1.3a|1
Front Shock absorber has a serious fluid leak N/S O/S front fork legs (5.3.2 (b))1
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Offside Rear Direction indicator insecure |1.5.3b|1
Nearside Rear Drive chain sprocket so loose it is likely to fail |6.1.7 |c| |ii||1
Indicator switch defective |1.5.4|1
Rear Stop lamp remains on when the brake is released |1.3.1e|1
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e|1
Front Headlamp insecure |1.2.3b|1
Centre Exhaust is leaking and excessively noisey |7.1.1b|1
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Rear Rear suspension bearing has excessive free play |2.4.A2a|i||1
Rear reflector on motorcycle deteriorated and function impaired |1.4.2a|1
Headlamp aim beam image kick-up is to the offside |1.6.1|1
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Roller brake test indicates a sticking brake |3.3.A1a|1
Front Drive chain excessively loose |6.2.1d|1
Front Headlamp aim beam image too far to the right |1.6.4|1
Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j|1
Stop lamp does not illuminate immediately a brake applies front brake lever |1.3.1a|1
Fairings insecure and likely to impede the steering front fairing damaged and insecure |2.1.2e|1
Brake performance not tested unable to test due to binding front brake |3.3|1
Fuel pipe leaking |7.2.1a|1
Front Exhaust excessively deteriorated |7.1.1a|1
Nearside Rear Direction indicator not working |1.5.1c|1
Roller brake test indicates a severely juddering brake |3.3.A1b|1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride swinging arm spindle lock nut not appropriate |6.2.1h|1
Fuel system component insecure bolt missing from fuel tank |7.2.1b|1
Rear position lamp adversely affected by the operation of another lamp |1.1.3b|1
Offside Front Brake locking device missing |3.2.A1e|1
Front Horn missing |1.7.1|1
Offside Front Front position lamp incorrect colour |1.1.2a|1
Brake hose excessively deteriorated1
Brake hose which buldges both |3.2.B4|1
Offside Brake hose fouling insucure |3.2.B3b|1
Centre Exhaust excessively deteriorated splitter pipe split |7.1.1a|1
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort no reserve going to bars |3.3.A1c|1
Offside Rear Direction indicators affected by the operation of another lamp |1.5.1c|1
Offside Front Upper Front shock absorber seal failed and leaking oil |2.3.3|1
Brake lever is positioned so that the brake cannot be readily applied |3.1.3c|1
Rear Direction indicator missing |1.5.1a|1
Front mudguard insecure |2.3.7|1
Chain guard insecure |6.2.1c|1
Throttle operating incorrectly throttle sticking |6.2.1f|1
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c|1
Nearside Front Brake disc|s| has excessive run out |3.2.A1m|1
Brake lever has inadequate reserve travel |3.1.3b|1
Nearside Front position lamp missing |1.1.1a|1
Nearside Headlamp deteriorated and function impaired |1.2.3a|1
Nearside Handlebar deformed |2.1.1b|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Front Plate brake test indicates a binding brake |3.3.B1a|1
Front position lamp missing |1.1.1a|1
Front Decelerometer brake test indicates a binding brake |3.3.E1d|1
Offside Front Throttle operating incorrectly |6.2.1f|1
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c|1
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c|1
Nearside Fairings insecure and likely to impede the steering |2.1.2e|1
Offside Front Direction indicators not working |1.5.1c|1
Nearside Front Brake component modification unsafe (1.1.21 (d) (i))1
Rear Direction indicator obviously incorrectly positioned (4.4.3 (a))1
Offside Front Front wheel bearings are excessively rough |2.3.5b|1
Nearside Rear Front wheel bearings have excessive free play |2.3.5b|1
Rear Valve stem seriously damaged |5.2.3 |j||1
Front Valve stem seriously damaged |5.2.3 |j||1
Fuel system component insecure |7.2.1b|1
Front Stop lamp remains on when the brake is released |1.3.1e|1
Rear Brake rod insecure (1.1.15 (c))1
Rear Brake hose excessively twisted |1.1.12 |b| |ii||1
Horn control defective |1.7.2a|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy