>

MOT History from tests of petrol HONDA CBFs year 2014

Review the list of common HONDA CBF failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:75.83%
(The average a petrol HONDA CBF year 2014 passes without issue)
Based on:9,810 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment418
Drive chain excessively loose (6.1.7 (c) (i))142
Rear reflector missing (4.8.2 (a) (ii))110
Rear Stop lamp not working (4.3.1 (a) (ii))80
Headlamp not working on dipped beam (4.1.1 (a) (ii))80
Drive chain excessively loose |6.2.1d|73
Front Brake excessively binding (1.2.1 (f))54
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))50
Headlamp insecure (4.1.1 (c))49
Drive chain worn to excess (6.1.7 (c) (i))48
Horn not working (7.7 (a))47
Front Stop lamp not working (4.3.1 (a) (ii))47
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))46
Drive chain excessively loose |6.1.7 |c| |i||43
Rear reflector missing |4.8.2 |a| |ii||42
Rear Wheel bearing has excessive play (5.1.3 (a) (i))40
Rear Brake excessively binding (1.2.1 (f))37
Drive chain worn to excess |6.2.1e|37
Headlamp not working on dipped beam |4.1.1 |a| |ii||34
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||33
Rear reflector on motorcycle obscured |1.4.2b|33
Drive chain so loose it is likely to fail (6.1.7 (c) (ii))31
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|31
Stop lamp remains on when the brakes are released29
Rear reflector on motorcycle missing |1.4.1|28
Drive chain so worn it is likely to fail (6.1.7 (c) (ii))28
Registration plate issues27
Stop lamp not working (4.3.1 (a) (ii))26
Handlebar deformed |2.1.1b|26
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))25
Horn not working (7.7 (a) (ii))24
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))23
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))23
All direction indicators not working (4.4.1 (a) (ii))22
Rear Stop lamp not working |4.3.1 |a| |ii||22
Drive chain excessively tight (6.1.7 (k) (i))21
Rear Position lamp not working (4.2.1 (a))21
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))20
Headlamp aim not tested (4.1.2 (b))20
Drive chain worn to excess |6.1.7 |c| |i||20
Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii))20
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|20
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))19
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))19
Offside Front Direction indicator not working (4.4.1 (a) (ii))18
Wheel alignment incorrect which adversely affects the handling (2.4 (a))18
Nearside Front Direction indicator not working (4.4.1 (a) (ii))18
Headlamp not working on main beam (4.1.1 (a) (ii))17
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|17
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))17
Horn not working |1.7.3a|17
Drive chain excessively tight |6.2.1d|17
Front Position lamp not working (4.2.1 (a))16
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|16
Front Brake excessively binding |1.2.1 |f||15
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))15
Rear Rear reflector missing (4.8.2 (a) (ii))15
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e||15
Handlebar excessively deformed (2.2.1 (c) (i))14
Rear Brake pedal has insufficient reserve travel (1.1.2 (a))14
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))14
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))14
Front Stop lamp not working |4.3.1 |a| |ii||13
Rear Drive chain sprocket worn to excess |6.2.1e|13
Rear Brake excessively binding |1.2.1 |f||13
Rear Roller brake test indicates a binding brake |3.3.A1a|13
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))13
Rear Position lamp not working |4.2.1 |a||12
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))12
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))12
Headlamp insecure |1.2.3b|12
Dipswitch does not operate immediately when selected on main beam (4.1.3 (b))12
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))12
Wheel alignment incorrect which adversely affects the steering (2.4 (a))11
Rear Drive chain excessively loose (6.1.7 (c) (i))11
Wheel alignment incorrect which adversely affects the handling |2.5.1|11
Horn not working |7.7 |a| |ii||11
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii))11
Drive chain so loose it is likely to fail |6.1.7 |c| |ii||11
Nearside Rear Footrest missing (6.2.12 (a))11
Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii))11
Front Valve stem seriously damaged (5.2.3 (j))10
Registration plate lamp issues10
Steering headbearing has excessive free play |2.2.2|10
Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii))10
Offside Rear Footrest missing (6.2.12 (a))10
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii))9
Front Wheel bearing rough when rotated (5.1.3 (b) (i))9
Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii))9
Front Wheel bearing has excessive play (5.1.3 (a) (i))9
Headlamp insecure |4.1.1 |c||9
Steering headbearing has excessive wear or free play |2.2.2 |f| |i||9
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))9
Rear wheel bearings have excessive free play |2.4.A.2c|9
Drive chain sprocket worn to excess (6.1.7 (c) (i))9
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))8
Stop lamp not working |4.3.1 |a| |ii||8
Handlebar excessively deformed |2.2.1 |c| |i||8
Wheel alignment incorrect which adversely affects the handling |2.4 |a||8
Drive chain sprocket carrier worn to excess |6.2.1e|8
Headlamp aim not tested |4.1.2 |b||8
Front Brake grabbing severely (1.2.1 (c))8
Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a))8
Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))8
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii||8
Front Shock absorber has negligible damping effect (5.3.2 (b))8
Rear Valve stem seriously damaged (5.2.3 (j))8
Rear Brake grabbing severely (1.2.1 (c))8
Stop lamp does not illuminate immediately a brake applies |1.3.1a|8

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy