Most common failures | No# failures |
---|
Headlamp aim out of alignment | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Horn not working |1.7.3a| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Horn missing |1.7.1| | 1 |
Horn control defective |1.7.2a| | 1 |
Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Brake pedal pivots excessively worn |3.1.3a| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Registration plate issues | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Brake pipe union leaking fluid |3.2.B4| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Brake hose excessively deteriorated | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Upper Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Upper Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Upper Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Centre Front Lower Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
An item not tested |Manual| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Offside Footrest insecure riders |6.2.1a| | 1 |
Front Brake hose damaged and likely to fail |1.1.12 |a|| | 1 |
Offside Position lamp switch insecure |4.2.2 |b|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |