Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Throttle operating incorrectly |6.2.1f| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Stop lamp does not illuminate immediately a brake applies Rear brake |1.3.1a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Steering headbearing in such a condition that steering control is adversely affected Very notchy (2.2.2 (f) (ii)) | 1 |
Rear Suspension component pin or bush excessively worn Swing arm bushes have excessive play (5.3.4 (a) (i)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Nearside Exhaust mounting does not fully support the exhaust system Bolt missing |7.1.1.c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Brake cylinder leaking hydraulic fluid OFFSIDE FRONT CALIPER |3.2.B1e| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Offside Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Stop lamp insecure |1.3.3b| | 1 |
Offside Fuel system component leaking |7.2.1a| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Stop lamp missing |1.3.3a| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |