>

MOT History from tests of petrol HONDA CB600SFs year 2009

Review the list of common HONDA CB600SF failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:86.32%
(The average a petrol HONDA CB600SF year 2009 passes without issue)
Based on:424 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment10
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|4
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Drive chain excessively loose |6.2.1d|3
Headlamp not working on dipped beam |4.1.1 |a| |ii||2
Headlamp not working on main beam |4.1.1 |a| |ii||2
Rear reflector missing (4.8.2 (a) (ii))2
Horn sounds harsh or grating |1.7.3c|2
Registration plate issues2
Rear Rear wheel bearings have excessive free play |2.4.A.2c|2
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Headlamp aim not tested |4.1.2 |b||2
Rear Wheel bearing has excessive play (5.1.3 (a) (i))2
Steering movement excessively `notchy` with the wheel raised |2.2.1b|2
Nearside Front Direction indicator not working |4.4.1 |a| |ii||2
Drive chain worn to excess |6.2.1e|2
Stop lamp remains on when the brakes are released2
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii||2
Rear Wheel bearing has excessive play |5.1.3 |a| |i||2
Nearside Front Horn sound not in accordance with requirements |7.7 |c||1
Drive chain fouling another component |6.2.1d|1
Front Brake disc|s| has excessive run out |3.2.A1m|1
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Drive chain worn to excess o rings missing (6.1.7 (c) (i))1
Front Floor brake test indicates a binding brake |3.3.C2c|1
Rear reflector on motorcycle missing |1.4.1|1
Brake lever is bent and the brake cannot be readily applied |3.1.3c|1
Brake lever is so short and the brake cannot be readily applied |3.1.3c|1
Headlamp at least one does not illuminate on main beam main beam inop. plus warning lamp inop |1.2.2a|ii||1
Front All direction indicators not working all indicators flash when in use (4.4.1 (a) (ii))1
Rear Brake disc|s| excessively worn |3.2.A1l|1
Steering operation restricted in free movement from lock to lock |2.1.4 |c||1
Front Brake disc fractured |1.1.14 |a| |ii||1
Rear Direction indicator flashing more than 120 times per minute |1.5.1c|1
Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))1
Nearside Handlebar deformed |2.1.1b|1
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Headlamp not working on main beam (4.1.1 (a) (ii))1
Handlebar handgrip not secure to handlebars. BOTH |2.1.1c|1
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Front Direction indicator flashing more than 120 times per minute |1.5.1c|1
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Rear Brake hose excessively damaged marked yellow (1.1.12 (b) (ii))1
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Front Front position lamp insecure |1.1.1c|1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Chain guard insecure |6.2.1c|1
Stop lamp not working |4.3.1 |a| |ii||1
Front Horn not working |7.7 |a| |ii||1
Rear Drive chain so worn it is likely to fail (6.1.7 (c) (ii))1
Drive chain worn to excess (6.1.7 (c) (i))1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Registration plate lamp issues1
Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b))1
Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b))1
Front Stop lamp remains on when the brake is released |1.3.1e|1
Offside Direction indicators flashing more than 120 times per minute |1.5.1c|1
Offside Rear Brake component inadequately mounted rear caliper bracket fitted wrong. |1.1.21 |c||1
Offside Rear Stop lamp switch with a delay in operation brake operates before stop lamp . |4.3.2 |a| |ii||1
Offside Rear Brake caliper inadequately mounted and braking performance affected Brake caliper fitted incorrectly. |1.1.16 |c| |ii||1
Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e||1
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e||1
Rear Brake excessively binding |1.2.1 |f||1
Wheel alignment incorrect which adversely affects the handling Front end off set. |2.4 |a||1
Front Stop lamp not working (4.3.1 (a) (ii))1
Horn not working (7.7 (a) (ii))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy