Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Registration plate issues | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Drive chain worn to excess |6.2.1e| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Horn not working |1.7.3a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Brake pedal attachment screws missing. Clevis pin missing from rear brake pedal |3.1.2b| | 1 |
Stop lamp does not illuminate immediately a brake applies Rear brake pedal does not illuminate light |1.3.1a| | 1 |
Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning |4.4.1 |a| |ii|| | 1 |
Drive chain excessively loose rear wheel bearing to be checked after tightening chain |6.1.7 |c| |i|| | 1 |
Exhaust system insecure clamp on rear broken |6.1.2 |a|| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Offside Front Footrest missing FOOTREST RUBBER MISSING |6.2.1a| | 1 |
Offside Rear Footrest missing PILLION FOOTREST RUBBER MISSING |6.2.1a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Rear Brake caliper inadequately mounted (1.1.16 (c) (i)) | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Front Horn not working |1.7.3a| | 1 |
Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
Offside Rear Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Headlamp aim projected beam image obviously incorrect Bulb not fitted in correctly (4.1.2 (c)) | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Nearside Steering lock stop ineffective Forks hitting radiator on L/H lock |2.1.3| | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Registration plate lamp issues | 1 |