Most common failures | No# failures |
---|
Headlamp aim out of alignment | 33 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
Exhaust is leaking and excessively noisey |7.1.1b| | 9 |
Rear reflector on motorcycle missing |1.4.1| | 9 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Drive chain excessively loose |6.2.1d| | 7 |
Throttle operating incorrectly |6.2.1f| | 7 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 7 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Drive chain worn to excess |6.2.1e| | 5 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
Registration plate issues | 4 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Motorcycle structure excessively corroded |6.1.1a| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear suspension component excessively corroded. |2.4.A.1a| | 2 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Indicator switch insecure |1.5.4| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Front suspension assembly component loose |2.3.1| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Sidecar attachment insecure Non locking nut fitted |5.1.1b| | 1 |
Sidecar attachment has excessive play in a pin/bush |5.1.1d| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Centre Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Wheel |6.2.1h| | 1 |
Steering lock stop ineffective Both |2.1.3| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Fuel system component leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
Offside Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Brake hose damaged | 1 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Front Brake performance not tested |3.3| | 1 |
Front An item not tested |Manual| | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Central Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Offside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Brake component leaking fluid |3.2.B4| | 1 |
Horn not working |1.7.3a| | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Front Exhaust has a major leak of exhaust gases from engine to manifold (6.1.2 (a)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Central Engine mounting/bracket excessively loose Bolt through the Frame, Engine and Rear suspension arms Loose (6.1.8 (a) (ii)) | 1 |
Handlebar grip insecure to handlebar Both Grips (2.2.1 (d) (ii)) | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Offside Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking top/box |6.1.1c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Offside Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Exhaust excessively deteriorated |7.1.1a| | 1 |
Brake disc|s| excessively scored |3.2.A1l| | 1 |
Offside Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Drive chain fouling another component |6.2.1d| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Offside Fuel system component leaking |7.2.1a| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Nearside Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Steering lock stop maladjusted |2.1.3| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |