Most common failures | No# failures |
---|
Headlamp aim out of alignment | 32 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 13 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Throttle operating incorrectly |6.2.1f| | 9 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Drive chain excessively loose |6.2.1d| | 6 |
Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Riders seat insecure |6.2.1a| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Front suspension has inadequate damping effect. |2.3.6c| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Offside Steering lock stop ineffective |2.1.3| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Offside Front Throttle operating incorrectly |6.2.1f| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Registration plate issues | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Steering lock stop ineffective |2.1.3| | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Motorcycle structure excessively corroded |6.1.1a| | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 2 |
Brake hose damaged | 2 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Brake lever insecure |3.1.2a| | 2 |
Handlebar deformed |2.1.1b| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Nearside Drive chain fouling another component |6.2.1d| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Inner Fuel system component leaking |7.2.1a| | 1 |
Brake hose excessively deteriorated | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Offside Front Shock absorber has a serious fluid leak gaiter failure and badly pitted fork inner |5.3.2 |b|| | 1 |
Nearside Front Shock absorber has a serious fluid leak gaiter failure and badly pitted fork inner |5.3.2 |b|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Rear Rear wheel bearings are excessively tight Rear brake may also be sticking but unable to tell. |2.4.A.2c| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Brake component is fractured |3.1.5| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Front Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Brake hose excessively kinked |3.2.B3a| | 1 |
Rear Brake locking device missing rear calliper torque arm nut locking device missing |3.2.A1e| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Nearside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Inner Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Brake component has an inadequate repair l/h caliper both pads on one side of disc |3.1.5| | 1 |
Brake performance not tested |1.2.1 |g|| | 1 |
Brake caliper inadequately mounted and braking performance affected |1.1.16 |c| |ii|| | 1 |
Rear Wheel fixing loose |single fixing| |5.2.1 |a| |ii|| | 1 |
Nearside Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Central Front Upper Steering headbearing excessively stiff or notchy adjust (2.2.2 (f) (i)) | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear brake disc in such a condition that it is seriously weakened | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Front All direction indicators missing |4.4.1 |a| |ii|| | 1 |
Rear All direction indicators missing |4.4.1 |a| |ii|| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Direction indicators not working no front indicators
|1.5.1c| | 1 |
Front position lamp does not illuminate immediately when switched on side light |1.1.3a| | 1 |
Rear Brake excessively binding break binding badly |1.2.1 |f|| | 1 |
Brake reaction bracket insecure |3.2.A1j| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Offside Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Central Rear Lower Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Rear reflector reflecting white to the rear (4.8.2 (a) (ii)) | 1 |
Central Rear Lower Brake back plate insecure (1.1.14 (d)) | 1 |
All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Centre Drive chain fouling another component |6.2.1d| | 1 |
Nearside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Offside Front Braking system does not have an approriate system/s fitted according to its age |3.1.1| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Handlebar deformed |2.1.1b| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Horn not working |1.7.3a| | 1 |
Rear Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Offside Rear Road spring insecure (5.3.1 (a) (i)) | 1 |
Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |