Most common failures | No# failures |
---|
Headlamp aim out of alignment | 7 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Registration plate issues | 2 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Brake hose damaged | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Indicator tell tale not operating correctly |1.5.2| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Fuel tank leaking Fuel tank filler cap leaking |7.2.1a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Horn control not readily accesible. |1.7.2a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Suspension arm insecurely attached (5.3.3 (a) (i)) | 1 |