| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 28 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 10 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 9 |
| Registration plate issues | 9 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Steering headbearing has excessive free play |2.2.2| | 5 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 5 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
| Rear reflector on motorcycle missing |1.4.1| | 5 |
| Front wheel bearings have excessive free play |2.3.5b| | 5 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Drive chain excessively loose |6.2.1d| | 4 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Headlamp insecure |1.2.3b| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Front Brake excessively binding (1.2.1 (f)) | 2 |
| Horn not working |1.7.3a| | 2 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Offside Indicator tell tale not functioning |1.5.2| | 2 |
| Handlebar deformed |2.1.1b| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Rear reflector on motorcycle obscured |1.4.1| | 2 |
| Horn not working (7.7 (a)) | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Rear Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Nearside Front Brake pipe union leaking fluid |3.2.B4| | 1 |
| Offside Front Brake pipe union leaking fluid |3.2.B4| | 1 |
| Upper Brake pipe union leaking fluid |3.2.B4| | 1 |
| Brake pipe union leaking fluid |3.2.B4| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Brake caliper insecurely mounted and braking performance affected caliper bolts loose (1.1.16 (c) (ii)) | 1 |
| Central Headlamp at least one does not illuminate on dipped beam blown bulb (1.2.2a(i)) | 1 |
| Nearside Front Direction indicator damaged and function impaired (1.5.3a) | 1 |
| Front Brake lever insecure |3.1.2a| | 1 |
| Position lamp switch faulty |1.1.4a| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Rear Brake component is excessively corroded |3.1.5| | 1 |
| Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected sprocket loose (5.2.1 (c) (ii)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working not flashing (4.4.1 (a) (ii)) | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Offside Front Upper Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Brake rod insecure torque arm locking device missing (1.1.15 (c)) | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Nearside Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Front Brake caliper insecure (1.1.16 (c) (i)) | 1 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Indicator switch defective |1.5.4| | 1 |
| Brake disc|s| excessively worn disc to small with reduced brake contact |3.2.A1l| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Front Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
| Stop lamp does not illuminate immediately a brake applies faulty front brake stop light switch |1.3.1a| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride rear sprocket mounting nuts |6.2.1h| | 1 |
| Front shock absorber seal failed and leaking oil Left hand |2.3.3| | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Exhaust markings indicating not for road use or similar wording (6.1.2 (c)) | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Nearside Rear Footrest insecure needs repositioning not upright (6.2.12 (a)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Rear Brake reaction bracket insecure Split Pin Missing |3.2.A1j| | 1 |
| Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
| Front Brake lagging in operation |1.2.1 |d|| | 1 |
| Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected bike is accelerating when turning right (6.2.7 (a) (ii)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Rear Stop lamp not working stop lamp not working off rear foot brake (4.3.1 (a) (ii)) | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Central Rear Upper Stop lamp does not illuminate by the operation of both brake controls stop lamp does not operate from rear brake control (4.3.2 (a) (iii)) | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |