Most common failures | No# failures |
---|
Headlamp aim out of alignment | 33 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 12 |
Exhaust is leaking and excessively noisey |7.1.1b| | 12 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 9 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Drive chain excessively loose |6.2.1d| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
Throttle operating incorrectly |6.2.1f| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Nearside Rear Footrest missing |6.2.1a| | 5 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 5 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear Brake reaction bracket insecure |3.2.A1j| | 4 |
Registration plate issues | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Horn not working |1.7.3a| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen bulb in upside down!! |1.6.B.1| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Brake hose damaged | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Fuel system component insecure |7.2.1b| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Handlebar handgrip missing |2.1.1c| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Exhaust has a major leak of exhaust gases leaking at cylinder head (6.1.2 (a)) | 1 |
Steering headbearing excessively stiff or notchy large central notch (2.2.2 (f) (i)) | 1 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Nearside Handlebar deformed |2.1.1b| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear Rear wheel spindle loose |2.4.A.2b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Brake locking device missing Rear brake torque arm split pins missing |PRS| |3.2.A1e| | 1 |
Throttle operating incorrectly Sticking throttle |6.2.1f| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Rear Brake grabbing severely (1.2.1 (c)) | 1 |
Front Brake grabbing severely (1.2.1 (c)) | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Footrest insecure both rear |6.2.1a| | 1 |
Rear Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Brake pedal pivot has excessive free play (1.1.1 (b)) | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Footrest missing |6.2.1a| | 1 |
Offside Footrest missing |6.2.1a| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Indicator tell tale not functioning |1.5.2| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Rear Brake rod insecure (1.1.15 (c)) | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Offside Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear Brake linkage clevis joint excessively worn |3.2.A1d| | 1 |
Rear Brake locking device insecure brake arm bolt not done up |3.2.A1e| | 1 |
Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen no pattern (4.1.2 (a)) | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Nearside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Brake caliper insecurely mounted and braking performance affected caliper bolts loose (1.1.16 (c) (ii)) | 1 |
Central Rear Position lamp not working (4.2.1 (a)) | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |