| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 29 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
| Registration plate issues | 8 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
| Drive chain worn to excess |6.2.1e| | 6 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Steering headbearing has excessive free play |2.2.2| | 6 |
| Drive chain excessively loose |6.2.1d| | 6 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 5 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Horn not working |1.7.3a| | 5 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Offside Front Direction indicator not working |1.5.1c| | 4 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 4 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 2 |
| Brake locking device missing |3.2.A1e| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Rear Brake locking device insecure |3.2.A1e| | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
| Offside Rear Direction indicator insecure |1.5.3b| | 2 |
| Rear Wheel spoke excessively loose |4.2.1b| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Outer Rear Upper Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Centre Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Centre Front Lower Wheel spoke excessively corroded |4.2.1b| | 1 |
| Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Rear Brake back plate insecure locking device missing (1.1.14 (d)) | 1 |
| Nearside Front Footrest insecure (6.2.12 (a)) | 1 |
| Offside Front Footrest insecure (6.2.12 (a)) | 1 |
| Rear Rear wheel bearings are excessively tight |2.4.A.2c| | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Offside Front suspension assembly component loose |2.3.1| | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Brake pedal attachment screws missing. |3.1.2b| | 1 |
| Brake component has an inadequate repair |3.1.5| | 1 |
| Rear Brake reaction bracket excessively worn Torque reaction bar (1.1.15 (b)) | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Front Direction indicator missing both |4.4.1 |a| |ii|| | 1 |
| Rear Direction indicator not working both |4.4.1 |a| |ii|| | 1 |
| Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Position lamp missing |4.2.1 |a|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Wheel fixing missing |multiple fixings| |5.2.1 |a| |i|| | 1 |
| Headlamp insecure |4.1.1 |c|| | 1 |
| Brake clevis joint insecure |1.1.15 |c|| | 1 |
| Headlamp light intensity severely reduced dip beam |4.1.4 |a|| | 1 |
| Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride split pin rear wheel spindle |6.2.1h| | 1 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Rear Brake reaction bracket excessively worn (1.1.15 (b)) | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Front Horn not working (7.7 (a)) | 1 |
| Rear Wheel spoke excessively loose (5.2.2 (d)) | 1 |
| Rear Valve stem seriously misaligned (5.2.3 (j)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Brake hose fouling |3.2.B3b| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Brake master cylinder severely corroded |3.2.B1b| | 1 |
| Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Offside Rear Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Fuel hose leaking (6.1.3 (b) (i)) | 1 |
| Nearside Rear Lower Exhaust mounting missing |7.1.1c| | 1 |
| Nearside Front Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Fuel pipe leaking |7.2.1a| | 1 |
| Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Brake lever pivot excessively tight |1.1.1 |a|| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Brake component insecure Torque arm loose. |1.1.21 |c|| | 1 |
| Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Offside Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Centre Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Centre Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Centre Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Handlebar fouling on the fuel tank or bodywork on full lock Right hand lock (2.1.4 (b)) | 1 |
| Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Position lamp not working Front and rear |4.2.1 |a|| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Fuel system component leaking |6.1.3 |b| |i|| | 1 |
| Rear Suspension arm corroded and seriously weakened Swinging arm corroded and holed |5.3.3 |b| |i|| | 1 |
| Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
| Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Front Engine mounting/bracket bracket missing frame/engine fixing bolt (6.1.8 (a) (ii)) | 1 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Fuel pipe damaged to and from filter |6.1.3 |c| |ii|| | 1 |
| Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Nearside Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Offside Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| All direction indicators not working Not flashing (4.4.1 (a) (ii)) | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Brake hose leaking fluid |3.2.B4| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Throttle operating incorrectly Not returning free |6.2.1f| | 1 |
| Indicator tell tale not functioning Hi beam |1.5.2| | 1 |
| Front Brake cylinder leaking hydraulic fluid Banjo bolt |3.2.B1e| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Horn likely to be confused with an emergency vehicle siren |7.7 |c| |ii|| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Brake reaction bracket insecure |3.2.A1j| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
| Centre Front Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Brake pedal insecure |3.1.2a| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Handlebar grip insecure to handlebar Both insecure (2.2.1 (d) (ii)) | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Throttle control functioning such that safe operation of the motorcycle is adversely affected Sticking On (6.2.7 (a) (ii)) | 1 |
| Front Brake lagging in operation Can Still Be Moved With Brake On (1.2.1 (d)) | 1 |