MOT History from tests of petrol HONDA CB250s year 1976

Review the list of common HONDA CB250 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history

Pass percent:81.91%

(The average a petrol HONDA CB250 year 1976 passes without issue)

Based on:94 MOT Tests

Most common failures	No# failures
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Horn not working \|1.7.3a\|	2
Headlamp aim out of alignment	1
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Front Wheel spoke excessively loose \|4.2.1b\|	1
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Front Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Front Horn is not continous or uniform \|1.7.3c\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Front Brake locking device missing \|3.2.A1e\|	1
Rear Brake locking device missing \|3.2.A1e\|	1
Rear Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Offside Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Nearside Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Drive chain worn to excess \|6.2.1e\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Fuel system component leaking \|7.2.1a\|	1
Riders seat insecure \|6.2.1a\|	1
Front Headlamp insecure \|1.2.3b\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Horn not working \|1.7.3a\|	2
Headlamp aim out of alignment	1
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Front Wheel spoke excessively loose \|4.2.1b\|	1
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Front Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Front Horn is not continous or uniform \|1.7.3c\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Front Brake locking device missing \|3.2.A1e\|	1
Rear Brake locking device missing \|3.2.A1e\|	1
Rear Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Offside Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Nearside Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Drive chain worn to excess \|6.2.1e\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Fuel system component leaking \|7.2.1a\|	1
Riders seat insecure \|6.2.1a\|	1
Front Headlamp insecure \|1.2.3b\|	1

MOT History from tests of petrol HONDA CB250s year 1976

Find us on Facebook