| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 66 |
| Registration plate issues | 26 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 16 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 11 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 8 |
| Drive chain excessively loose |6.2.1d| | 8 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Throttle operating incorrectly |6.2.1f| | 7 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
| Headlamp aim beam image kick up to the offside |1.6| | 5 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
| Steering headbearing has excessive free play |2.2.2| | 5 |
| Front Brake excessively binding (1.2.1 (f)) | 5 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
| Rear reflector on motorcycle missing |1.4.1| | 4 |
| Stop lamp remains on when the brakes are released | 4 |
| Offside Front Direction indicator not working |1.5.1c| | 4 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
| Headlamp insecure (4.1.1 (c)) | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 3 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Front Position lamp not working (4.2.1 (a)) | 2 |
| Indicator switch inoperative (4.4.2 (a) (ii)) | 2 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Offside Rear Lower Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
| Nearside Front Footrest insecure nearside driver footpeg insecure |6.2.1a| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Rear Stop lamp not working when rear brake is operated (4.3.1 (a) (ii)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Offside Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Offside Front Brake component inadequately mounted right front flexy is mounted to the fork in correctly and is going to damage the flexy hose. (1.1.21 (c)) | 1 |
| Stop lamp does not illuminate immediately a brake applies front and rear |1.3.1a| | 1 |
| Offside Front Brake back plate|s| insecure |3.2.A1j| | 1 |
| Horn not working |1.7.3a| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Nearside Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Offside Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking sidestand loose |6.1.1c| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Outer Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Central Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Brake hose damaged | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Rear Exhaust system insecure (6.1.2 (a)) | 1 |
| Front Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced radiator (6.1.1 (b) (ii)) | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| All direction indicators not working fuse |4.4.1 |a| |ii|| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Upper Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Offside Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Nearside Front Footrest insecure |6.2.12 |a|| | 1 |
| All direction indicators missing (4.4.1 (a) (ii)) | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front wheel has a loose wheel bolt|s| |4.2.3a| | 1 |
| Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Position lamp not working dipped beam (4.2.1 (a)) | 1 |
| Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Rear Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Front Stop lamp not working lever (4.3.1 (a) (ii)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Brake caliper has no reserve travel and braking performance affected |1.1.16 |e| |ii|| | 1 |
| Front Brake component modification adversely affecting braking performance brake caliper fouling discs |1.1.21 |d| |ii|| | 1 |
| Rear Suspension component mounting modified so the suspension is likely to fail other components rear wheel fouling mudguard on commpresion |5.3.3 |c| |ii|| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Direction indicator missing |1.5.1a| | 1 |
| Brake hose fouling |3.2.B3b| | 1 |
| Front Brake lever attachment screws missing |3.1.2b| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Centre Front Horn not working |1.7.3a| | 1 |
| Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Nearside Indicator switch insecure |1.5.4| | 1 |
| Offside Front Brake component cracked and seriously reduced in strength |3.2.A1| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Brake pipe excessively chafed |3.2.B2a| | 1 |
| Offside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Brake cylinder severely corroded |3.2.B1b| | 1 |
| Offside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Throttle operating incorrectly THROTTLE STICKING OPEN |6.2.1f| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Shock absorber has a serious fluid leak nearside and offside front (5.3.2 (b)) | 1 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Brake disc contaminated both front (1.1.14 (b)) | 1 |
| Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Nearside Front Brake caliper leaking and braking performance affected CONTAMINATED WITH FORK OIL (1.1.16 (b) (ii)) | 1 |
| Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Throttle operating incorrectly Stiff |6.2.7 |a| |i|| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Offside Front Footrest insecure Split pin missing. |6.2.1a| | 1 |
| Offside Rear Direction indicators not working Bad earth. |1.5.1c| | 1 |
| Offside Direction indicators not working Switch not working |1.5.1c| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Brake caliper inadequately mounted All pad pin locking devices missing |1.1.16 |c| |i|| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Brake lever attachment screws loose |3.1.2b| | 1 |
| Front Brake lever insecure |3.1.2a| | 1 |
| Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
| Offside Rear Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Nearside Front Brake caliper inadequately mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
| Throttle operating incorrectly on full left lock (6.2.7 (a) (i)) | 1 |
| Offside Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Throttle operating incorrectly tube sticky |6.2.1f| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |