>

MOT History from tests of petrol HONDA CB1000s year 1995

Review the list of common HONDA CB1000 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:85.02%
(The average a petrol HONDA CB1000 year 1995 passes without issue)
Based on:761 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment22
Throttle operating incorrectly |6.2.1f|7
Registration plate issues6
Front wheel bearings are excessively rough |2.3.5b|6
Front wheel bearings have excessive free play |2.3.5b|6
Rear reflector on motorcycle missing |1.4.1|5
Front Front wheel bearings have excessive free play |2.3.5b|4
Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|3
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e||2
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|2
Direction indicators flashing more than 120 times per minute |1.5.1c|2
Drive chain excessively loose |6.2.1d|2
Throttle operating incorrectly |6.2.7 |a| |i||2
Front All position lamps do not illuminate immediately when switched on |1.1.3a|2
Exhaust is leaking and excessively noisey |7.1.1b|2
Headlamp aim beam image kick up to the offside |1.6|2
Offside Front Direction indicator not working |1.5.1c|2
Nearside Front shock absorber seal failed and leaking oil |2.3.3|2
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Front Exhaust is leaking and excessively noisey |7.1.1b|2
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))1
Front Direction indicator obviously incorrectly positioned (4.4.3 (a))1
Stop lamp remains on when the brakes are released1
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Headlamp aim not tested |1.6|1
Front Stop lamp not working (4.3.1 (a) (ii))1
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i||1
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c|1
Exhaust markings indicating not for road use or similar wording |7.1.4|1
Nearside Front Direction indicator not working |1.5.1c|1
Front Wheel bearing has excessive play |5.1.3 |a| |i||1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Front Brake disc|s| has excessive run out |3.2.A1m|1
Nearside Rear Direction indicator not working |1.5.1c|1
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Front Position lamp not working |4.2.1 |a||1
Offside Position lamp switch insecure |4.2.2 |b||1
Nearside Position lamp switch insecure |4.2.2 |b||1
Chain guard insecure |6.2.1c|1
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Wheel alignment incorrect which adversely affects the handling (2.4 (a))1
Exhaust excessively deteriorated |7.1.1a|1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Nearside Front Footrest insecure |6.2.1a|1
Offside Front Footrest insecure |6.2.1a|1
Steering headbearing has excessive free play |2.2.2|1
Front Position lamp not working (4.2.1 (a))1
Nearside Rear Direction indicators not working |1.5.1c|1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Brake hose excessively deteriorated1
Fuel cap mounting flange/sealing method defective |7.2.2c|1
Offside Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Brake caliper inadequately mounted (1.1.16 (c) (i))1
Front Direction indicators flashing more than 120 times per minute |1.5.1c|1
Rear Direction indicators flashing more than 120 times per minute |1.5.1c|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Road spring missing |5.3.1 |c| |i||1
Direction indicators not working |1.5.1c|1
Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Rear Wheel bearing has excessive play (5.1.3 (a) (i))1
Front Wheel bearing has excessive play (5.1.3 (a) (i))1
Front Valve stem seriously damaged (5.2.3 (j))1
Rear reflector missing (4.8.2 (a) (ii))1
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Rear Stop lamp not working (4.3.1 (a) (ii))1
Brake lever has inadequate reserve travel |3.1.3b|1
Rear Rear reflector missing |4.8.2 |a| |ii||1
Front Brake fluid reservoir fluid not visible |1.1.10 |d| |iii||1
Front Brake master cylinder leaking |1.1.10 |b| |ii||1
Offside Rear Direction indicator insecure |1.5.3b|1
Rear Valve stem seriously damaged (5.2.3 (j))1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|1
Offside Footrest insecure |6.2.1a|1
Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Nearside Position lamp switch insecure |1.1.4b|1
Offside Position lamp switch insecure |1.1.4b|1
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Rear Brake fluid reservoir fluid not visible (1.1.10 (d) (iii))1
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Rear An item not tested |Manual|1
Nearside Rear Position lamp not working (4.2.1 (a))1
Throttle operating incorrectly (6.2.7 (a) (i))1
Front Position lamp light intensity significantly reduced |4.2.3 |a| |ii||1
Horn control not functioning. |1.7.2b|1
Nearside Shock absorber has a serious fluid leak (5.3.2 (b))1
Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Drive chain sprocket carrier worn to excess |6.2.1e|1
Drive chain excessively tight |6.2.1d|1
Footrest missing anti slip rubber |6.2.1a|1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Lower Rear mono-shock insecure Excessive play in all bushes. |2.4.B.4|1
Rear Hydraulic brake control feels spongy |3.1.4a|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4|1
Stop lamp not working (4.3.1 (a) (ii))1
Rear Position lamp not working (4.2.1 (a))1
Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Rear Brake component worn and seriously reduced in strength |3.2.A1|1
Rear Floor brake test indicates a binding brake |3.3.C2c|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy