>

MOT History from tests of petrol HONDA CB1s year 1990

Review the list of common HONDA CB1 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:74.57%
(The average a petrol HONDA CB1 year 1990 passes without issue)
Based on:405 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment15
Drive chain excessively loose |6.2.1d|8
Registration plate issues8
Rear reflector on motorcycle missing |1.4.1|7
Offside Front shock absorber seal failed and leaking oil |2.3.3|7
Front Roller brake test indicates a binding brake |3.3.A1a|6
Rear Roller brake test indicates a binding brake |3.3.A1a|5
Nearside Front shock absorber seal failed and leaking oil |2.3.3|5
Front wheel bearings have excessive free play |2.3.5b|4
Front wheel bearings are excessively rough |2.3.5b|4
Steering headbearing has excessive free play |2.2.2|4
Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Rear wheel bearings have excessive free play |2.4.A.2c|3
Drive chain worn to excess |6.2.1e|3
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Front Wheel has an excessively distorted bead rim. |4.2.2|2
Nearside Rear Direction indicators not working |1.5.1c|2
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|2
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|2
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|2
Headlamp insecure |1.2.3b|2
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|2
Rear Brake disc|s| is excessively distorted |3.2.A1m|2
Brake pedal insecure |3.1.2a|2
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e|2
Nearside Front Direction indicator not working |1.5.1c|2
Drive chain excessively tight |6.2.1d|2
Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|2
Front shock absorber seal failed and leaking oil |2.3.3|2
Rear Rear reflector on motorcycle missing |1.4.1|2
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|2
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Rear Drive chain sprocket worn to excess |6.2.1e|2
Nearside Rear Direction indicator insecure |1.5.3b|2
Offside Footrest insecure |6.2.1a|1
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Rear reflector missing (4.8.2 (a) (ii))1
Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii||1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain clip |6.2.1h|1
Nearside Steering lock stop ineffective |2.1.3|1
Brake performance not tested |3.3|1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Front Front suspension has inadequate damping effect. |2.3.6c|1
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Offside Steering lock stop maladjusted |2.1.3|1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Rear Brake pedal insecure |1.1.2 |e| |i||1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Front Wheel bearing rough when rotated (5.1.3 (b) (i))1
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Brake disc|s| has excessive run out |3.2.A1m|1
Nearside Rear Chain guard insecure |6.2.1c|1
Front Roller brake test indicates a sticking brake |3.3.A1a|1
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Front Brake lever has inadequate reserve travel |3.1.3b|1
Offside Handlebar deformed |2.1.1b|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Centre Front Decelerometer brake test indicates a severely grabbing brake |3.3.E1e|1
Fuel cap sealing washer deteriorated |7.2.2c|1
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c|1
Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c|1
Offside Front Handlebar deformed |2.1.1b|1
Rear Brake disc|s| cracked |3.2.A1g|1
Offside Rear Direction indicator insecure |1.5.3b|1
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Front Front position lamp missing |1.1.1a|1
Front Lower Steering lock stop loose |2.1.3|1
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Front Horn not working |1.7.3a|1
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Headlamp aim beam image kick-up is to the offside |1.6.1|1
Chain guard insecure |6.2.1c|1
Front Drive chain sprocket worn to excess |6.2.1e|1
Offside Front Footrest insecure |6.2.1a|1
Front Front wheel bearings have excessive free play |2.3.5b|1
Front position lamp adversely affected by the operation of another lamp |1.1.3b|1
Front Brake lever cannot be applied smoothly |3.1.3d|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Front Brake pipe excessively chafed |3.2.B2a|1
Offside Front Lower Exhaust is leaking and excessively noisey |7.1.1b|1
Nearside Rear Lower Drive chain sprocket worn to excess |6.2.1e|1
Nearside Rear Lower Drive chain worn to excess |6.2.1e|1
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Throttle operating incorrectly |6.2.1f|1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Front Brake disc|s| is excessively distorted |3.2.A1m|1
Front Floor brake test indicates a binding brake |3.3.C2c|1
Centre Exhaust excessively deteriorated |7.1.1a|1
Centre Exhaust is leaking and excessively noisey |7.1.1b|1
Fuel tank leaking |7.2.1a|1
Indicator switch insecure |1.5.4|1
Headlamp switch insecure |1.2.4|1
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Fuel system component leaking |7.2.1a|1
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Rear Brake disc fractured (1.1.14 (a) (ii))1
Rear Exhaust mounting missing |7.1.1c|1
Nearside Rear Footrest missing |6.2.1a|1
Offside Rear Footrest missing |6.2.1a|1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy