| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 46 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 13 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 11 |
| Registration plate issues | 10 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Drive chain excessively loose |6.2.1d| | 8 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
| Steering headbearing has excessive free play |2.2.2| | 6 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 6 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Throttle operating incorrectly |6.2.1f| | 5 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Rear reflector on motorcycle missing |1.4.1| | 4 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 4 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
| Rear Drive chain excessively loose |6.2.1d| | 3 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 3 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 2 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Rear Brake locking device missing |3.2.A1e| | 2 |
| Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
| Nearside Steering lock stop missing |2.1.3| | 2 |
| Brake reaction bracket insecure |3.2.A1j| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Riders seat insecure |6.2.1a| | 1 |
| Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Offside Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Centre Footrest insecure |6.2.1a| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Handlebar cracked |2.1.1b| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. swing arm |2.4.A.2d| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Nearside Footrest insecure |6.2.12 |a|| | 1 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Offside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Front Rear wheel rotation likely to be impeded cable holder |6.2.1b| | 1 |
| Nearside Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Stop lamp not working both inop (4.3.1 (a) (ii)) | 1 |
| Nearside Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Brake hose leaking fluid |3.2.B4| | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls front brake switch (4.3.2 (a) (iii)) | 1 |
| Headlamp not working on main beam bulb (4.1.1 (a) (ii)) | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Rear Gradient brake test indicates a sticking brake |3.3.D1c| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Offside Front Shock absorber has a serious fluid leak Fork leg. (5.3.2 (b)) | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Rear Brake pedal insecure (1.1.2 (e) (i)) | 1 |
| Rear Brake pedal is inoperative |3.1.3c| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Nearside Front Upper Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Front position lamp obscured more than 50% |1.1.1d| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Front Brake pipe likely to become detached or damaged (1.1.11 (d) (ii)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Direction indicator missing all indicators missing |1.5.1a| | 1 |
| Stop lamp insecure rear mudguard loose |1.3.3b| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Front Brake component is excessively corroded |3.1.5| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Offside Steering lock stop missing |2.1.3| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Nearside Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Lower Exhaust excessively deteriorated |7.1.1a| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Direction indicator flashing more than 120 times per minute all |1.5.1c| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Nearside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Offside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
| Fuel cap ineffective |6.1.3 |b| |i|| | 1 |
| Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Steering lock stop ineffective |2.1.3| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Nearside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Indicator tell tale not functioning |1.5.2| | 1 |
| Offside Indicator tell tale not functioning |1.5.2| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Nearside Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Dipswitch does not operate immediately when selected on dipped beam |4.1.3 |b|| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |