Most common failures | No# failures |
---|
Headlamp aim out of alignment | 16 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 12 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Throttle operating incorrectly |6.2.1f| | 4 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Registration plate issues | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 2 |
Indicator tell tale not functioning |1.5.2| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Upper Shock absorber has an excessively worn bush |5.3.2 |c|| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 1 |
Nearside Handlebar fouling on the fuel tank or bodywork on full lock handle bar clamp (2.1.4 (b)) | 1 |
Offside Handlebar fouling on the fuel tank or bodywork on full lock handle bar clamp (2.1.4 (b)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake hose which buldges |3.2.B4| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Nearside Front Brake component leaking fluid |3.2.B4| | 1 |
Front Brake lever excessively damaged |3.2.A1c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Offside Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Rear Brake locking device missing split pin |3.2.A1e| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Nearside Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Horn is not continous or uniform |1.7.3c| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Brake linkage excessively corroded |3.2.A1c| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Offside Front Footrest missing |6.2.1a| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Headlamp aim not tested |1.6| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Fuel hose leaking (6.1.3 (b) (i)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Rear spring corroded and seriously weakened |2.4A1b|ii|| | 1 |
Offside Rear spring corroded and seriously weakened |2.4A1b|ii|| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |