>

MOT History from tests of petrol HONDA CA125s year 2000

Review the list of common HONDA CA125 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:67.60%
(The average a petrol HONDA CA125 year 2000 passes without issue)
Based on:287 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment15
Headlamp aim beam image kick up to the offside |1.6|12
Drive chain excessively loose |6.2.1d|8
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|6
Registration plate issues5
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|5
Offside Front shock absorber seal failed and leaking oil |2.3.3|4
Steering headbearing has excessive free play |2.2.2|4
Wheel alignment incorrect which adversely affects the handling |2.5.1|4
Rear reflector missing |4.8.2 |a| |ii||3
Steering movement excessively `notchy` with the wheel raised |2.2.1b|3
Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Offside Rear Direction indicator not working |1.5.1c|3
Front position lamp does not illuminate immediately when switched on |1.1.3a|3
Rear reflector on motorcycle missing |1.4.1|3
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|3
Rear Brake reaction bracket insecure |3.2.A1j|2
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Front Front wheel bearings have excessive free play |2.3.5b|2
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Nearside Rear Direction indicator insecure |1.5.3b|2
Throttle operating incorrectly |6.2.1f|2
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|2
Exhaust is leaking and excessively noisey |7.1.1b|2
Rear Roller brake test indicates a binding brake |3.3.A1a|2
Exhaust has a major leak of exhaust gases |6.1.2 |a||2
Drive chain excessively tight |6.2.1d|2
Nearside Rear Direction indicator not working |1.5.1c|2
Rear Roller brake test indicates a sticking brake |3.3.A1a|2
Front Wheel spoke excessively loose |4.2.1b|2
Rear Wheel spoke excessively loose |4.2.1b|2
Brake reaction bracket securing bolt|s| loose |3.2.A1j|1
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
An item not tested |Manual|1
Horn not working |1.7.3a|1
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c|1
Offside Front Direction indicator insecure |1.5.3b|1
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j|1
Brake reaction bracket insecure |3.2.A1j|1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Inner Handlebar handgrip not secure to handlebars. |2.1.1c|1
Steering headbearing has excessive wear or free play |2.2.2 |f| |i||1
Rear Stop lamp not working |4.3.1 |a| |ii||1
Rear Position lamp not working (4.2.1 (a))1
Rear Brake locking device missing |3.2.A1e|1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Centre Front Upper Headlamp damaged and function impaired |1.2.3a|1
Front Hydraulic brake control feels spongy (3.1.4a)1
Steering movement excessively notchy with the wheel raised (2.2.1b)1
Centre Exhaust is leaking and excessively noisey |7.1.1b|1
Rear Stop lamp remains on when the brake is released |1.3.1e|1
Front Steering headbearing has excessive free play |2.2.2|1
Centre Fuel hose leaking |7.2.1a|1
Stop lamp affected by the operation of the horn |1.3.2|1
Handlebar mounting clamp bolt loose |2.1.1a|1
Front Horn not working |1.7.3a|1
Rear Brake back plate|s| insecure |3.2.A1j|1
Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
Front All position lamps do not illuminate immediately when switched on |1.1.3a|1
Handlebar deformed |2.1.1b|1
Exhaust excessively deteriorated |7.1.1a|1
Offside Rear Direction indicator insecure |1.5.3b|1
Rear Drive chain worn to excess |6.2.1e|1
Footrest missing |6.2.1a|1
Stop lamp missing |1.3.3a|1
Rear position lamp missing |1.1.1a|1
Rear Wheel spoke missing |4.2.1b|1
Direction indicators affected by the operation of another lamp |1.5.1c|1
Steering headbearing has excessive wear or free play bearing loose (2.2.2 (f) (i))1
Offside Rear Direction indicator not working (4.4.1 (a) (ii))1
Nearside Drive chain so worn it is likely to fail drive chain tight and has many tight spots(split link loose) (6.1.7 (c) (ii))1
Rear Brake pivot excessively worn |1.1.15 |b||1
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i||1
Rear Rear reflector missing (4.8.2 (a) (ii))1
Front Brake disc|s| excessively worn |3.2.A1l|1
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Centre Headlamp aim beam image kick-up is to the offside |1.6.1|1
Rear Rear reflector on motorcycle missing |1.4.1|1
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Front Headlamp aim beam image kick up to the offside |1.6|1
Steering movement excessively stiff with the wheel raised |2.2.1b|1
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a||1
Front Headlamp aim beam image kick-up is to the offside |1.6.1|1
Offside Front Footrest insecure |6.2.1a|1
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Direction indicator flashing less than 60 times a minute |1.5.1c|1
Nearside Footrest insecure |6.2.1a|1
Offside Footrest insecure |6.2.1a|1
Centre Front Upper Direction indicators not working |1.5.1c|1
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Direction indicators not working |1.5.1c|1
Front mudguard insecure |2.3.7|1
Nearside Front Direction indicator not working |1.5.1c|1
Drive chain excessively loose |6.1.7 |c| |i||1
Rear Drive chain sprocket so worn it is likely to fail |6.1.7 |c| |ii||1
Drive chain worn to excess |6.1.7 |c| |i||1
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i||1
Offside Front Direction indicator not working (4.4.1 (a) (ii))1
Brake pedal has inadequate reserve travel |3.1.3b|1
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))1
Centre Rear Rear reflector on motorcycle missing |1.4.1|1
Fuel cap does not fasten securely by a positive means |7.2.2b|1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy