Most common failures | No# failures |
---|
Headlamp aim out of alignment | 18 |
Registration plate issues | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 4 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Direction indicator not working |1.5.1c| | 2 |
Registration plate lamp issues | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Horn not working |1.7.3a| | 2 |
Rear Direction indicators not working |1.5.1c| | 2 |
Offside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Front Exhaust has a major leak of exhaust gases downpipe/head joint leaking (6.1.2 (a)) | 1 |
Nearside Rear Direction indicator light intensity significantly reduced (4.4.3 (a)) | 1 |
Rear Wheel spindle locking device missing Split pin. (5.2.1 (d)) | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Headlamp aim not tested |1.6| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Rear Brake linkage has restricted free movement (1.1.15 (e)) | 1 |
Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Offside Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Centre Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
An item not tested |Manual| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Offside Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Footrest insecure Locking devices not fitted |6.2.1a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Offside Lower Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Centre Front Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Nearside Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Centre Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Rear wheel spindle securing nut locking device insecure split pin not fitted correctly |2.4.A.2b| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Steering headbearing has excessive wear or free play excessive movement at handle bars (2.2.2 (f) (i)) | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Brake back plate insecure split pin missing (1.1.14 (d)) | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Offside Front Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front Lower Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Lower Horn is not a constant note |1.7.3c| | 1 |
Rear Upper Fuel tank leaking |7.2.1a| | 1 |
Front Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Chain guard fouling another component |6.2.1c| | 1 |