| Most common failures | No# failures |
|---|
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
| Headlamp aim out of alignment | 7 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 6 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
| Registration plate issues | 3 |
| Horn not working |1.7.3a| | 3 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 3 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
| Drive chain excessively loose |6.2.1d| | 2 |
| Rear Wheel spoke excessively loose |4.2.1b| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Fuel system component leaking |7.2.1a| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Suspension arm ball joint excessively worn swinging arm |5.3.4 |a| |i|| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Nearside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Rear Brake component insecure brake pedal (1.1.21 (c)) | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Rear Position lamp likely to become detached (4.2.1 (c) (ii)) | 1 |
| Rear Brake rod insecure (1.1.15 (c)) | 1 |
| Rear Brake component insecure (1.1.21 (c)) | 1 |
| Front suspension assembly has excessive free play in the pivot bearings. |2.3.2| | 1 |
| Central Front Lower Steering linkage has excessive free play fork pivot arms loose |2.2.2| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
| Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Fuel cap leaking (6.1.3 (b) (i)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Direction indicator missing all (4.4.1 (a) (ii)) | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Steering linkage has excessive free play |2.2.2| | 1 |
| Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Fuel system component leaking |6.1.3 |b| |i|| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear All position lamps not working |4.2.1 |a|| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Rear Wheel fixing loose |single fixing| |5.2.1 |a| |ii|| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Nearside Rear Shock absorber insecurely attached nut slack |5.3.2 |a| |i|| | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Front Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Front Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Nearside Rear Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Lower Front suspension assembly has excessive free play in the pivot bearings. |2.3.2| | 1 |
| Centre Rear Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Front Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Rear Rear suspension component loose |2.4.A.1a| | 1 |
| Front Headlamp aim does not move downwards when dipped |1.6.5| | 1 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
| Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Rear Steering lock stop maladjusted |2.1.3| | 1 |
| Front Horn control defective |1.7.2a| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Steering linkage has excessive free play |2.2.2| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |