| Most common failures | No# failures |
|---|
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 11 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 10 |
| Headlamp aim out of alignment | 9 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 9 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 6 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Headlamp aim not tested |1.6| | 5 |
| Horn not working |1.7.3a| | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Drive chain excessively loose |6.2.1d| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Horn not working (7.7 (a) (ii)) | 3 |
| Stop lamp remains on when the brakes are released | 2 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Headlamp switch faulty |1.2.4| | 2 |
| Front Direction indicator not working |1.5.1c| | 2 |
| Rear Direction indicator not working |1.5.1c| | 2 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 2 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Rear shock absorber insecurely mounted |2.4.A.3b| | 2 |
| Rear Wheel spoke excessively loose |4.2.1b| | 2 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
| Rear position lamp missing |1.1.1a| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Nearside Direction indicator not working |1.5.1c| | 2 |
| Registration plate issues | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Registration plate lamp issues | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
| Rear Suspension arm attachment bracket/mounting insecure swing arm spindle loose (5.3.3 (a) (i)) | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Front Position lamp not working low beam (4.2.1 (a)) | 1 |
| Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake lever pivot excessively tight (1.1.1 (a)) | 1 |
| Nearside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Nearside Rear Rear suspension component loose |2.4.A.1a| | 1 |
| Rear Brake drum|s| securing bolt|s| loose |3.2.A1g| | 1 |
| Front Steering linkage has excessive free play |2.2.2| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Centre Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
| Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front wheel spindle loose |2.3.5a| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Steering linkage has excessive free play |2.2.2| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Throttle operating incorrectly throttle sticks |6.2.1f| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
| Offside Front Brake lever mounting insecure |3.1.2a| | 1 |
| Offside Upper Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Rear All position lamps not working (4.2.1 (a)) | 1 |
| Offside Front Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Position lamp missing parking light missing |4.2.1 |a|| | 1 |
| Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Upper Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Front Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
| Headlamp aim not tested |4.1.2 |b|| | 1 |
| Front Steering linkage insecure to the extent there is excessive movement at the mountings |2.1.3 |a| |ii|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front An item not tested |Manual| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front Brake back plate|s| insecure |3.2.A1j| | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Lower Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Front wheel spindle loose |2.3.3a| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Nearside Rear Chain guard insecure |6.2.1c| | 1 |
| Front Brake lever mounting insecure |3.1.2a| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Front Horn missing |1.7.1| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Drive chain sprocket excessively loose Cush Drive excessively loose . (6.1.7 (c) (i)) | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Front suspension assembly has excessive free play in the pivot bearings. |2.3.2| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Brake linkage has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
| Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Upper Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Rear Wheel fixing missing (single fixing) (5.2.1 (a) (ii)) | 1 |
| Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Suspension component likely to fail (5.3.3 (b) (ii)) | 1 |
| Central Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Offside Front Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Central Front Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Nearside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Offside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
| Steering linkage locking device missing (2.1.3 (d)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
| Motorcycle structure adversely modified Rear fork. |6.1.1b| | 1 |
| Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Front Brake lever pivot has excessive free play (1.1.1 (b)) | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Front Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 1 |