MOT History from tests of petrol HONDA BALIs year 1994

Review the list of common HONDA BALI failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history

Pass percent:83.19%

(The average a petrol HONDA BALI year 1994 passes without issue)

Based on:113 MOT Tests

Most common failures	No# failures
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	4
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	2
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Exhaust excessively deteriorated \|7.1.1a\|	1
Front wheel spindle loose \|2.3.5a\|	1
Central Rear Position lamp not working (4.2.1 (a))	1
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	1
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	1
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	1
Front Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	1
Front Front suspension assembly has excessive free play in the pivot bearings. \|2.3.2\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Nearside Stop lamp remains on when the brake is released lever \|1.3.1e\|	1
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Suspension arm pin or bush excessively worn both front lower arms \|5.3.4 \|a\| \|i\|\|	1
Rear suspension movement is excessively stiff \|2.4.A.3b\|	1
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Nearside Direction indicators not working \|1.5.1c\|	1
Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Front Horn not working \|1.7.3a\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	1
Nearside Steering lock stop ineffective \|2.1.3\|	1
Front Brake lever cannot be released smoothly \|3.1.3d\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	4
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	2
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Exhaust excessively deteriorated \|7.1.1a\|	1
Front wheel spindle loose \|2.3.5a\|	1
Central Rear Position lamp not working (4.2.1 (a))	1
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	1
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	1
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	1
Front Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	1
Front Front suspension assembly has excessive free play in the pivot bearings. \|2.3.2\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Nearside Stop lamp remains on when the brake is released lever \|1.3.1e\|	1
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Suspension arm pin or bush excessively worn both front lower arms \|5.3.4 \|a\| \|i\|\|	1
Rear suspension movement is excessively stiff \|2.4.A.3b\|	1
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Nearside Direction indicators not working \|1.5.1c\|	1
Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Front Horn not working \|1.7.3a\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	1
Nearside Steering lock stop ineffective \|2.1.3\|	1
Front Brake lever cannot be released smoothly \|3.1.3d\|	1

MOT History from tests of petrol HONDA BALIs year 1994

Find us on Facebook