Most common failures | No# failures |
---|
Headlamp aim out of alignment | 13 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Drive chain excessively loose |6.2.1d| | 9 |
Headlamp insecure |1.2.3b| | 8 |
Registration plate lamp issues | 4 |
Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Stop lamp remains on when the brakes are released | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Exhaust mounting missing |7.1.1c| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Horn not working |1.7.3a| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Drive chain excessively loose |6.1.7 |c| |i|| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Registration plate issues | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Centre Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Shock absorber has a serious fluid leak Front left fork (5.3.2 (b)) | 1 |
Stop lamp not working Front brake switch faulty |4.3.1 |a| |ii|| | 1 |
Shock absorber has a serious fluid leak Front left fork leg (5.3.2 (b)) | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
Rear Brake rod insecure Brake ankor bolt insecure! |1.1.15 |c|| | 1 |
Stop lamp does not illuminate immediately a brake applies both controls |1.3.1a| | 1 |
Rear shock absorber seal failed and leaking oil both |2.4.A.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear Brake clevis joint insecure Brake anchor pin missing! (1.1.15 (c)) | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Decelerometer brake test the less effective brake control does not achieve an efficiency of 25%. |3.3.E1b| | 1 |
Front Wheel spoke cracked |5.2.2 |d|| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Footrest missing |6.2.1a| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Horn control not readily accesible. |1.7.2a| | 1 |
Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Central Rear Upper Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Offside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Footrest missing rubber
|6.2.1a| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Headlamp lens missing (4.1.1 (b) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Footrest insecure Locking device (split pin) missing. (6.2.12 (a)) | 1 |