Most common failures | No# failures |
---|
Headlamp aim out of alignment | 71 |
Headlamp insecure |1.2.3b| | 25 |
Drive chain excessively loose |6.2.1d| | 24 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 23 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 17 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Riders seat insecure |6.2.1a| | 15 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 13 |
Registration plate issues | 10 |
Steering headbearing has excessive free play |2.2.2| | 9 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 8 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 8 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Stop lamp remains on when the brake is released |1.3.1e| | 7 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 7 |
Front Brake disc|s| excessively worn |3.2.A1l| | 7 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 6 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 6 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 6 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
Front Steering headbearing has excessive free play |2.2.2| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Exhaust has part of the system missing |7.1.1a| | 4 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Rear Wheel damaged significantly reducing the original strength |4.2.1a| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 3 |
Registration plate lamp issues | 3 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 3 |
Chain guard insecure |6.2.1c| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 3 |
Nearside Rear Footrest missing |6.2.1a| | 3 |
Offside Rear Footrest missing |6.2.1a| | 3 |
Rear Motorcycle structure excessively damaged |6.1.1a| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 2 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 2 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Drive chain fouling another component |6.2.1d| | 2 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
All direction indicators not working |4.4.1 |a| |ii|| | 2 |
Rear Brake drum|s| insecure |3.2.A1g| | 2 |
Stop lamp does not emit a steady light |1.3.1b| | 2 |
All direction indicators not working (4.4.1 (a) (ii)) | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
Front Fork yoke deformed |2.1.1b| | 2 |
Offside Direction indicator not working |1.5.1c| | 2 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Nearside Drive chain excessively loose |6.2.1d| | 2 |
Rear Riders seat insecure |6.2.1a| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Footrest insecure |6.2.1a| | 2 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Fuel cap missing |7.2.2a| | 2 |
Front position lamp insecure |1.1.1c| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Front suspension assembly component excessively bent |2.3.1| | 2 |
Front Front position lamp insecure |1.1.1c| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |