MOT History from tests of petrol HONDA ANF125s year 2004

Review the list of common HONDA ANF125 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history

Pass percent:79.74%

(The average a petrol HONDA ANF125 year 2004 passes without issue)

Based on:5,542 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	193
Drive chain excessively loose \|6.2.1d\|	95
Headlamp insecure \|1.2.3b\|	74
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	64
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	62
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	58
Front Roller brake test indicates a binding brake \|3.3.A1a\|	52
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	51
Registration plate issues	47
Steering headbearing has excessive free play \|2.2.2\|	45
Exhaust is leaking and excessively noisey \|7.1.1b\|	36
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	30
Riders seat insecure \|6.2.1a\|	30
Rear wheel bearings have excessive free play \|2.4.A.2c\|	30
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	29
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	28
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	27
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	24
Stop lamp affected by the operation of another lamp \|1.3.2\|	22
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	22
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	22
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	22
Drive chain worn to excess \|6.2.1e\|	21
Stop lamp remains on when the brake is released \|1.3.1e\|	21
Horn not working \|1.7.3a\|	20
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	20
Registration plate lamp issues	19
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	18
Front wheel bearings have excessive free play \|2.3.5b\|	18
Horn not loud enough to be heard by another road user \|1.7.3a\|	17
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	16
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	15
Front Floor brake test indicates a binding brake \|3.3.C2c\|	14
Nearside Rear Footrest missing \|6.2.1a\|	14
Front Wheel spoke excessively loose \|4.2.1b\|	13
Direction indicators affected by the operation of another lamp \|1.5.1c\|	12
Front Steering headbearing has excessive free play \|2.2.2\|	12
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	11
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	11
Rear Drive chain sprocket worn to excess \|6.2.1e\|	11
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	11
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	11
Headlamp aim not tested \|1.6\|	10
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	10
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	10
Chain guard insecure \|6.2.1c\|	10
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	9
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	9
Brake pedal has inadequate reserve travel \|3.1.3b\|	8
Offside Rear Footrest missing \|6.2.1a\|	8
Drive chain excessively tight \|6.2.1d\|	8
Horn is not a constant note \|1.7.3c\|	8
Rear Footrest missing \|6.2.1a\|	8
Front Stop lamp remains on when the brake is released \|1.3.1e\|	8
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	8
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	8
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	7
Exhaust excessively deteriorated \|7.1.1a\|	7
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	7
Headlamp aim beam image kick up to the offside \|1.6\|	7
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	7
Throttle operating incorrectly \|6.2.1f\|	7
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	7
Direction indicators not working \|1.5.1c\|	7
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	7
Drive chain sprocket carrier worn to excess \|6.2.1e\|	7
Nearside Rear Direction indicator incorrect colour \|1.5.1b\|	7
Front position lamp insecure \|1.1.1c\|	7
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	6
Brake pedal cannot be released smoothly \|3.1.3d\|	6
Rear reflector on motorcycle missing \|1.4.1\|	6
Front Headlamp insecure \|1.2.3b\|	6
Handlebar deformed \|2.1.1b\|	6
Front Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	6
Rear Drive chain excessively loose \|6.2.1d\|	6
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	6
Offside Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	6
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking \|6.1.1c\|	6
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	6
Nearside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	6
Offside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	6
An item not tested \|Manual\|	5
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	5
All position lamps adversely affected by the operation of another lamp \|1.1.3b\|	5
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	5
Front Direction indicator affected by the operation of another lamp \|1.5.1c\|	5
Front suspension has inadequate damping effect. \|2.3.6c\|	5
Stop lamp does not emit a steady light \|1.3.1b\|	5
Offside Rear Direction indicator not working \|1.5.1c\|	5
Front shock absorber seal failed and leaking oil \|2.3.3\|	5
Rear Wheel has an excessively distorted bead rim. \|4.2.2\|	5
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	5
Front Wheel damaged significantly reducing the original strength \|4.2.1a\|	5
Front Stop lamp affected by the operation of another lamp \|1.3.2\|	5
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	5
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	5
Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	5
Nearside Footrest insecure \|6.2.1a\|	5
Front mudguard insecure \|2.3.7\|	5
Offside Front Direction indicator affected by the operation of another lamp \|1.5.1c\|	4
Rear Wheel spoke excessively loose \|4.2.1b\|	4
Direction indicators flashing less than 60 times a minute \|1.5.1c\|	4
Rear Direction indicator affected by the operation of another lamp \|1.5.1c\|	4
Direction indicator affected by the operation of another lamp \|1.5.1c\|	4
Front Brake excessively binding \|1.2.1 \|f\|\|	4
Offside Front Direction indicators not working \|1.5.1c\|	4
Front Front wheel bearings have excessive free play \|2.3.5b\|	4
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	4
Nearside Rear Direction indicator not working \|1.5.1c\|	4
Headlamp not working on dipped beam \|4.1.1 \|a\| \|ii\|\|	4
Footrest missing \|6.2.1a\|	4
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Front Direction indicator flashing less than 60 times a minute \|1.5.1c\|	4
Rear Brake pedal is bent and the brake cannot be readily applied \|3.1.3c\|	4
Front Drive chain sprocket worn to excess \|6.2.1e\|	4
Front Brake lever cannot be applied smoothly \|3.1.3d\|	4
Front Direction indicator flashing more than 120 times per minute \|1.5.1c\|	4
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	4

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	193
Drive chain excessively loose \|6.2.1d\|	95
Headlamp insecure \|1.2.3b\|	74
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	64
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	62
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	58
Front Roller brake test indicates a binding brake \|3.3.A1a\|	52
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	51
Registration plate issues	47
Steering headbearing has excessive free play \|2.2.2\|	45
Exhaust is leaking and excessively noisey \|7.1.1b\|	36
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	30
Riders seat insecure \|6.2.1a\|	30
Rear wheel bearings have excessive free play \|2.4.A.2c\|	30
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	29
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	28
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	27
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	24
Stop lamp affected by the operation of another lamp \|1.3.2\|	22
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	22
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	22
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	22
Drive chain worn to excess \|6.2.1e\|	21
Stop lamp remains on when the brake is released \|1.3.1e\|	21
Horn not working \|1.7.3a\|	20
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	20
Registration plate lamp issues	19
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	18
Front wheel bearings have excessive free play \|2.3.5b\|	18
Horn not loud enough to be heard by another road user \|1.7.3a\|	17
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	16
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	15
Front Floor brake test indicates a binding brake \|3.3.C2c\|	14
Nearside Rear Footrest missing \|6.2.1a\|	14
Front Wheel spoke excessively loose \|4.2.1b\|	13
Direction indicators affected by the operation of another lamp \|1.5.1c\|	12
Front Steering headbearing has excessive free play \|2.2.2\|	12
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	11
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	11
Rear Drive chain sprocket worn to excess \|6.2.1e\|	11
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	11
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	11
Headlamp aim not tested \|1.6\|	10
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	10
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	10
Chain guard insecure \|6.2.1c\|	10
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	9
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	9
Brake pedal has inadequate reserve travel \|3.1.3b\|	8
Offside Rear Footrest missing \|6.2.1a\|	8
Drive chain excessively tight \|6.2.1d\|	8
Horn is not a constant note \|1.7.3c\|	8
Rear Footrest missing \|6.2.1a\|	8
Front Stop lamp remains on when the brake is released \|1.3.1e\|	8
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	8
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	8
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	7
Exhaust excessively deteriorated \|7.1.1a\|	7
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	7
Headlamp aim beam image kick up to the offside \|1.6\|	7
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	7
Throttle operating incorrectly \|6.2.1f\|	7
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	7
Direction indicators not working \|1.5.1c\|	7
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	7
Drive chain sprocket carrier worn to excess \|6.2.1e\|	7
Nearside Rear Direction indicator incorrect colour \|1.5.1b\|	7
Front position lamp insecure \|1.1.1c\|	7
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	6
Brake pedal cannot be released smoothly \|3.1.3d\|	6
Rear reflector on motorcycle missing \|1.4.1\|	6
Front Headlamp insecure \|1.2.3b\|	6
Handlebar deformed \|2.1.1b\|	6
Front Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	6
Rear Drive chain excessively loose \|6.2.1d\|	6
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	6
Offside Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	6
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking \|6.1.1c\|	6
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	6
Nearside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	6
Offside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	6
An item not tested \|Manual\|	5
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	5
All position lamps adversely affected by the operation of another lamp \|1.1.3b\|	5
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	5
Front Direction indicator affected by the operation of another lamp \|1.5.1c\|	5
Front suspension has inadequate damping effect. \|2.3.6c\|	5
Stop lamp does not emit a steady light \|1.3.1b\|	5
Offside Rear Direction indicator not working \|1.5.1c\|	5
Front shock absorber seal failed and leaking oil \|2.3.3\|	5
Rear Wheel has an excessively distorted bead rim. \|4.2.2\|	5
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	5
Front Wheel damaged significantly reducing the original strength \|4.2.1a\|	5
Front Stop lamp affected by the operation of another lamp \|1.3.2\|	5
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	5
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	5
Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	5
Nearside Footrest insecure \|6.2.1a\|	5
Front mudguard insecure \|2.3.7\|	5
Offside Front Direction indicator affected by the operation of another lamp \|1.5.1c\|	4
Rear Wheel spoke excessively loose \|4.2.1b\|	4
Direction indicators flashing less than 60 times a minute \|1.5.1c\|	4
Rear Direction indicator affected by the operation of another lamp \|1.5.1c\|	4
Direction indicator affected by the operation of another lamp \|1.5.1c\|	4
Front Brake excessively binding \|1.2.1 \|f\|\|	4
Offside Front Direction indicators not working \|1.5.1c\|	4
Front Front wheel bearings have excessive free play \|2.3.5b\|	4
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	4
Nearside Rear Direction indicator not working \|1.5.1c\|	4
Headlamp not working on dipped beam \|4.1.1 \|a\| \|ii\|\|	4
Footrest missing \|6.2.1a\|	4
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Front Direction indicator flashing less than 60 times a minute \|1.5.1c\|	4
Rear Brake pedal is bent and the brake cannot be readily applied \|3.1.3c\|	4
Front Drive chain sprocket worn to excess \|6.2.1e\|	4
Front Brake lever cannot be applied smoothly \|3.1.3d\|	4
Front Direction indicator flashing more than 120 times per minute \|1.5.1c\|	4
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	4

MOT History from tests of petrol HONDA ANF125s year 2004

Find us on Facebook