Most common failures | No# failures |
---|
Headlamp aim out of alignment | 16 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Headlamp insecure |1.2.3b| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Registration plate lamp issues | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Registration plate issues | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Horn is not a constant note |1.7.3c| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front Front position lamp insecure |1.1.1c| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Central Rear Lower Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Nearside Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Wheel fractured significantly reducing the original strength |4.2.1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Front Brake linked system has a seized caliper pivot. |3.2.B5| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Nearside Indicator switch defective |1.5.4| | 1 |
Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Brake lining(s) less than 1.0 mm thick no reserve adjustment on rear (1.1.13 (a)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Centre Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Rear shock absorber has inadequate damping effect. both |2.4.A.3b| | 1 |
Rear shock absorber seal failed and leaking oil both |2.4.A.1c| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied Adjusted (1.1.2 (d)) | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Brake lever attachment screws missing |3.1.2b| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front An item not tested |Manual| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Horn not working (7.7 (a)) | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Headlamp insecure Reflector assembly not connected to handlebar cowl correctly. (4.1.1 (c)) | 1 |