>

MOT History from tests of petrol HONDA ANCs year 2014

Review the list of common HONDA ANC failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:85.27%
(The average a petrol HONDA ANC year 2014 passes without issue)
Based on:2,336 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment49
Registration plate lamp issues42
Stop lamp remains on when the brakes are released24
Rear Brake lever has insufficient reserve travel (1.1.2 (a))22
Registration plate issues21
Rear Stop lamp not working (4.3.1 (a) (ii))13
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))11
Headlamp not working on dipped beam (4.1.1 (a) (ii))9
Rear Brake lever has inadequate reserve travel |3.1.3b|9
Front Brake excessively binding (1.2.1 (f))8
Front Position lamp not working (4.2.1 (a))8
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))8
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))7
Rear Shock absorber has negligible damping effect (5.3.2 (b))6
Front Valve stem seriously damaged (5.2.3 (j))5
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))5
Rear Brake lever has insufficient reserve travel |1.1.2 |a||5
Headlamp not working on dipped beam |4.1.1 |a| |ii||5
Stop lamp not working (4.3.1 (a) (ii))5
Horn not working (7.7 (a))4
Rear Position lamp not working (4.2.1 (a))4
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))4
Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||4
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))4
Front Stop lamp not working (4.3.1 (a) (ii))4
Nearside Front Position lamp not working (4.2.1 (a))4
Rear Stop lamp remains on when the brake is released |1.3.1e|3
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||3
Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b))3
Headlamp not working on main beam |4.1.1 |a| |ii||3
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))3
Rear Brake lining|s| less than 1.0 mm thick |1.1.13 |a||3
Front Wheel excessively distorted (5.2.2 (c) (i))3
Front Brake disc significantly and obviously worn |1.1.14 |a| |i||3
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii))3
Rear Brake drum significantly and obviously worn (1.1.14 (a) (i))3
Steering movement excessively `notchy` with the wheel raised |2.2.1b|3
Rear Stop lamp not working |4.3.1 |a| |ii||3
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))3
Horn not working |7.7 |a| |ii||3
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii))3
Rear Valve stem seriously damaged (5.2.3 (j))3
Stop lamp remains on when the brake is released |1.3.1e|2
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||2
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))2
Headlamp aim not tested (4.1.2 (b))2
Front brake disc in such a condition that it is seriously weakened2
Rear Shock absorber has negligible damping effect |5.3.2 |b||2
Offside Front Position lamp not working (4.2.1 (a))2
Horn not working (7.7 (a) (ii))2
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))2
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e||2
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))2
Headlamp not working on main beam (4.1.1 (a) (ii))2
Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a))2
Front Wheel bearing rough when rotated (5.1.3 (b) (i))2
Front Brake lever cannot be applied smoothly |3.1.3d|2
Brake lever has insufficient reserve travel (1.1.2 (a))2
Stop lamp not working |4.3.1 |a| |ii||2
Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Front Headlamp insecure (4.1.1 (c))2
Rear Brake lagging in operation (1.2.1 (d))2
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Riders seat insecure (6.2.5 (a) (ii))2
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i))2
Front Stop lamp not working |4.3.1 |a| |ii||2
Front Headlamp not working on main beam (4.1.1 (a) (ii))2
Rear Shock absorber has a serious fluid leak (5.3.2 (b))2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy