MOT History from tests of petrol HONDA 250s year 1996

Review the list of common HONDA 250 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history

Pass percent:75.76%

(The average a petrol HONDA 250 year 1996 passes without issue)

Based on:66 MOT Tests

Most common failures	No# failures
Drive chain excessively loose \|6.2.1d\|	4
Front Floor brake test indicates a binding brake \|3.3.C2c\|	2
Rear Drive chain sprocket carrier worn to excess \|6.2.1e\|	2
Headlamp aim out of alignment	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear Valve stem seriously damaged (5.2.3 (j))	1
Front Brake excessively binding (1.2.1 (f))	1
Nearside Rear Shock absorber insecurely attached \|5.3.2 \|a\| \|i\|\|	1
Rear Drive chain sprocket worn to excess \|6.2.1e\|	1
Front Drive chain sprocket carrier worn to excess \|6.2.1e\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	1
Front Floor brake test indicates a severely grabbing brake \|3.3.C2d\|	1
Rear Drive chain excessively loose \|6.2.1d\|	1
Drive chain sprocket worn to excess \|6.2.1e\|	1
Front Front wheel bearings are excessively rough \|2.3.5b\|	1
Rear Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	1
Offside Rear Direction indicator not working \|1.5.1c\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Nearside Rear Footrest insecure \|6.2.1a\|	1
Nearside Front Direction indicator flashing less than 60 times a minute \|1.5.1c\|	1
Nearside Rear Direction indicator flashing less than 60 times a minute \|1.5.1c\|	1
Rear Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Offside Rear Rear shock absorber insecurely mounted \|2.4.A.3b\|	1
Front Front suspension assembly component loose \|2.3.1\|	1
Front Stop lamp remains on when the brake is released \|1.3.1e\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Drive chain excessively loose \|6.2.1d\|	4
Front Floor brake test indicates a binding brake \|3.3.C2c\|	2
Rear Drive chain sprocket carrier worn to excess \|6.2.1e\|	2
Headlamp aim out of alignment	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear Valve stem seriously damaged (5.2.3 (j))	1
Front Brake excessively binding (1.2.1 (f))	1
Nearside Rear Shock absorber insecurely attached \|5.3.2 \|a\| \|i\|\|	1
Rear Drive chain sprocket worn to excess \|6.2.1e\|	1
Front Drive chain sprocket carrier worn to excess \|6.2.1e\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	1
Front Floor brake test indicates a severely grabbing brake \|3.3.C2d\|	1
Rear Drive chain excessively loose \|6.2.1d\|	1
Drive chain sprocket worn to excess \|6.2.1e\|	1
Front Front wheel bearings are excessively rough \|2.3.5b\|	1
Rear Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	1
Offside Rear Direction indicator not working \|1.5.1c\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Nearside Rear Footrest insecure \|6.2.1a\|	1
Nearside Front Direction indicator flashing less than 60 times a minute \|1.5.1c\|	1
Nearside Rear Direction indicator flashing less than 60 times a minute \|1.5.1c\|	1
Rear Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Offside Rear Rear shock absorber insecurely mounted \|2.4.A.3b\|	1
Front Front suspension assembly component loose \|2.3.1\|	1
Front Stop lamp remains on when the brake is released \|1.3.1e\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1

MOT History from tests of petrol HONDA 250s year 1996

Find us on Facebook