MOT History from tests of petrol HILLMAN HUSKYs year 1963

Review the list of common HILLMAN HUSKY failures below or to perform a specific mot history check on your HILLMAN then use our popular KnowYourCar service

mot history

Pass percent:72.00%

(The average a petrol HILLMAN HUSKY year 1963 passes without issue)

Based on:25 MOT Tests

Most common failures	No# failures
Parking brake: efficiency below requirements \|3.7.B.7\|	4
Registration plate lamp issues	3
Brake pipe excessively corroded	2
Brakes imbalanced across an axle	2
Nearside Front Front position lamp\|s\| not working \|1.1.A.3b\|	2
Headlamp not working on dipped beam \|1.7.5a\|	1
Headlamp not working on main beam \|1.7.5a\|	1
Rear parking brake recording little or no effort	1
Nearside rear brake recording little or no effort \|3.7.B.5a\|	1
Nearside Front position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Nearside Direction indicator flashing less than 60 times a minute \|1.4.A.2g\|	1
Nearside Rear Shock absorber has a serious fluid leak \|2.7.3\|	1
Nearside Inner Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Outer Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Inner Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Outer Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Parking brake: efficiency below requirements \|3.7.C.1b\|	1
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Front Lower Shock absorber has an excessively worn bush \|2.7.4\|	1
Nearside Front Lower Shock absorber insecure \|2.7.2b\|	1
Offside Parking brake mechanism/associated mounting prescribed area is excessively corroded \|3.1.9\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Horn not working \|1.6.2a\|	1
Offside front brake grabbing severely \|3.7.A.2b\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear brake drum contaminated by oil \|3.5.1h\|	1
Nearside Front Shock absorber has a serious fluid leak \|2.7.3\|	1
Brake pedal feels spongy with the vacuum fully depleted \|3.3.C.2\|	1
Offside Front Direction indicator not working \|1.4.A.2c\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Parking brake: efficiency below requirements \|3.7.B.7\|	4
Registration plate lamp issues	3
Brake pipe excessively corroded	2
Brakes imbalanced across an axle	2
Nearside Front Front position lamp\|s\| not working \|1.1.A.3b\|	2
Headlamp not working on dipped beam \|1.7.5a\|	1
Headlamp not working on main beam \|1.7.5a\|	1
Rear parking brake recording little or no effort	1
Nearside rear brake recording little or no effort \|3.7.B.5a\|	1
Nearside Front position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Nearside Direction indicator flashing less than 60 times a minute \|1.4.A.2g\|	1
Nearside Rear Shock absorber has a serious fluid leak \|2.7.3\|	1
Nearside Inner Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Outer Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Inner Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Outer Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Parking brake: efficiency below requirements \|3.7.C.1b\|	1
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Front Lower Shock absorber has an excessively worn bush \|2.7.4\|	1
Nearside Front Lower Shock absorber insecure \|2.7.2b\|	1
Offside Parking brake mechanism/associated mounting prescribed area is excessively corroded \|3.1.9\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Horn not working \|1.6.2a\|	1
Offside front brake grabbing severely \|3.7.A.2b\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear brake drum contaminated by oil \|3.5.1h\|	1
Nearside Front Shock absorber has a serious fluid leak \|2.7.3\|	1
Brake pedal feels spongy with the vacuum fully depleted \|3.3.C.2\|	1
Offside Front Direction indicator not working \|1.4.A.2c\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1

MOT History from tests of petrol HILLMAN HUSKYs year 1963

Find us on Facebook