MOT History from tests of petrol HILLMAN HILLMANs year 1964

Review the list of common HILLMAN HILLMAN failures below or to perform a specific mot history check on your HILLMAN then use our popular KnowYourCar service

mot history

Pass percent:85.25%

(The average a petrol HILLMAN HILLMAN year 1964 passes without issue)

Based on:61 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	5
Parking brake: efficiency below requirements \|3.7.B.7\|	2
Nearside Stop lamp not working \|1.2.1b\|	2
Offside Stop lamp not working \|1.2.1b\|	2
Rear parking brake recording little or no effort	2
Offside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Indicator switch faulty \|1.4.A.1\|	1
Exhaust engine idle speed too high \|7.3.A.2a\|	1
Nearside Rear Passenger`s seat cannot be secured in the upright position. \|6.2.A.2\|	1
Offside Rear Passenger`s seat cannot be secured in the upright position. \|6.2.A.2\|	1
Nearside Suspension component mounting prescribed area is inadequately repaired \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Braking system leaking \|3.6.A.1\|	1
Brakes imbalanced across an axle	1
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams \|1.7.4b\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Brake hose bulging under pressure \|3.6.B.3\|	1
Rear Brake hose leaking \|3.6.A.1\|	1
Nearside Front Brake hose bulging under pressure \|3.6.B.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Direction indicators not working \|1.4.A.2c\|	1
Offside Direction indicators adversely affected by the operation of another lamp \|1.4.A.2h\|	1
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Front brake application uneven	1
Offside Obligatory mirror missing \|8.1.1\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Headlamp not working on main beam \|1.7.5a\|	1
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Stop lamp not working \|1.2.1b\|	1
Parking brake lever has no reserve travel \|3.1.6b\|	1
Offside Inner Front Lower Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	5
Parking brake: efficiency below requirements \|3.7.B.7\|	2
Nearside Stop lamp not working \|1.2.1b\|	2
Offside Stop lamp not working \|1.2.1b\|	2
Rear parking brake recording little or no effort	2
Offside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Indicator switch faulty \|1.4.A.1\|	1
Exhaust engine idle speed too high \|7.3.A.2a\|	1
Nearside Rear Passenger`s seat cannot be secured in the upright position. \|6.2.A.2\|	1
Offside Rear Passenger`s seat cannot be secured in the upright position. \|6.2.A.2\|	1
Nearside Suspension component mounting prescribed area is inadequately repaired \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Braking system leaking \|3.6.A.1\|	1
Brakes imbalanced across an axle	1
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams \|1.7.4b\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Brake hose bulging under pressure \|3.6.B.3\|	1
Rear Brake hose leaking \|3.6.A.1\|	1
Nearside Front Brake hose bulging under pressure \|3.6.B.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Direction indicators not working \|1.4.A.2c\|	1
Offside Direction indicators adversely affected by the operation of another lamp \|1.4.A.2h\|	1
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Front brake application uneven	1
Offside Obligatory mirror missing \|8.1.1\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Headlamp not working on main beam \|1.7.5a\|	1
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Stop lamp not working \|1.2.1b\|	1
Parking brake lever has no reserve travel \|3.1.6b\|	1
Offside Inner Front Lower Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1

MOT History from tests of petrol HILLMAN HILLMANs year 1964

Find us on Facebook