Most common failures | No# failures |
---|
Registration plate issues | 30 |
Headlamp aim out of alignment | 14 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Horn not working |1.7.3a| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
Handlebar mounting clamp loose |2.1.1a| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Horn not working (7.7 (a)) | 2 |
Stop lamp does not illuminate by the operation of both brake controls front brake light not working (4.3.2 (a) (iii)) | 2 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Front Motorcycle structure joining/attachment plate or fastening insecure |6.1.1 |b| |i|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Registration plate lamp issues | 1 |
Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Drive belt excessively tight (6.1.7 (k) (i)) | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Front Suspension component modified so the suspension is inoperative (5.3.3 (c) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Front Valve stem seriously misaligned (5.2.3 (j)) | 1 |
Central Front Handlebar mounting insecure insufficient grip on clamps (2.2.1 (a) (i)) | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |