| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 14 |
| Registration plate issues | 12 |
| Rear reflector on motorcycle missing |1.4.1| | 9 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Registration plate lamp issues | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Offside Front Wheel spoke excessively loose 3 SPOKES LOOSE FRONT WHEEL |4.2.1b| | 1 |
| Nearside Indicator switch insecure SCREW MISSING ON SWITCH - REPLACED |1.5.4| | 1 |
| Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Stop lamp remains on when the brake is released from front control |1.3.1e| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Horn not working |1.7.3a| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Handlebar so insecure it is likely to become detached |2.2.1 |b| |ii|| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Brake rod insecure rod fixing bolt loose on pedal (1.1.15 (c)) | 1 |
| Nearside Front Footrest insecure (6.2.12 (a)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Central Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Drive belt pulley excessively loose Loose bolts, dangerous (6.1.7 (c) (i)) | 1 |
| Offside Rear Exhaust has a major leak of exhaust gases exhaust flange nut missing causing blow from manifold (6.1.2 (a)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Rear Stop lamp not working NOT WORKING ON REAR BRAKE (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |