Most common failures | No# failures |
---|
Registration plate issues | 30 |
Headlamp aim out of alignment | 24 |
Rear reflector on motorcycle missing |1.4.1| | 8 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 7 |
Horn not working |1.7.3a| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Registration plate lamp issues | 1 |
Drive belt excessively loose. |6.2.1d| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Stop lamp missing inop on both front and rear brakes |1.3.3a| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Rear Upper Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Parking brake not fitted on at least one wheel on a 3 wheeled vehicle |3.1.1| | 1 |
Centre Stop lamp not working |1.2.1b| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Front Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Brake linked system has a seized master cylinder pivot. |3.2.B5| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Rear Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Indicator tell tale not functioning |1.5.2| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Brake hose stretched by suspension movement |3.2.B3b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Riders seat insecure no fastener fitted |6.2.5 |a| |ii|| | 1 |
Offside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Stop lamp not working Not working from rear brake (4.3.1 (a) (ii)) | 1 |
Central Rear Stop lamp not working repaired at test electrical connector (4.3.1 (a) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Throttle operating incorrectly sticking and staying on (6.2.7 (a) (i)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Stop lamp not working FRONT AND REAR (4.3.1 (a) (ii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Handlebar so insecure it is likely to become detached Handlebar clamp bolts loose where they bolt into top yoke (2.2.1 (b) (ii)) | 1 |