Most common failures | No# failures |
---|
Headlamp aim out of alignment | 23 |
Registration plate issues | 20 |
Rear reflector on motorcycle missing |1.4.1| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Horn not working |1.7.3a| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Front Headlamp aim beam image kick up to the offside |1.6| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Vehicle identification number not permanently displayed |6.3.5a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Horn missing |1.7.1| | 2 |
Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Rear Drive chain excessively tight |6.2.1d| | 2 |
Rear Brake caliper|s| insecure |3.2.A1j| | 2 |
Headlamp aim not tested |1.6| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Brake disc|s| insecure |3.2.A1g| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Front Steering lock stop missing |2.1.3| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Drive chain excessively loose |6.2.1d| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Indicator switch defective |1.5.4| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Front suspension assembly component missing |2.3.1| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Centre Rear Lower Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Nearside Steering lock stop missing |2.1.3| | 1 |
Offside Steering lock stop missing |2.1.3| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Gradient brake test indicates a binding brake |3.3.D1c| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |