| Most common failures | No# failures |
|---|
| Registration plate issues | 56 |
| Headlamp aim out of alignment | 53 |
| Rear reflector on motorcycle missing |1.4.1| | 32 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 16 |
| Rear reflector missing (4.8.2 (a) (ii)) | 15 |
| Stop lamp remains on when the brakes are released | 14 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 9 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 7 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 5 |
| Rear reflector missing |4.8.2 |a| |ii|| | 4 |
| Stop lamp not working (4.3.1 (a) (ii)) | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Horn not working (7.7 (a)) | 3 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 3 |
| Offside Rear Direction indicators not working |1.5.1c| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Rear Brake excessively binding (1.2.1 (f)) | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Centre Rear Lower Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Rear Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Stop lamp does not illuminate immediately a brake applies New stop lamp bulb fitted at test station. |1.3.1a| | 1 |
| Rear reflector on motorcycle missing New rear reflector fitted at test station. |1.4.1| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Central Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Brake master cylinder defective but brake still operating (1.1.10 (b) (i)) | 1 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Offside Front All direction indicators incorrect colour |4.4.3 |a|| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Stop lamp emits other than a steady red light (4.3.3 (a) (ii)) | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Rear parking brake recording little or no effort | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Offside Front Shock absorber has a serious fluid leak LEAKING OIL DOWN ONTO BRAKE CALIPER. |5.3.2 |b|| | 1 |
| Handlebar so insecure it is likely to become detached HANDLEBAR CLAMPS LOOSE. |2.2.1 |b| |ii|| | 1 |
| Nearside Upper Fuel tank leaking (6.1.3 (b) (i)) | 1 |
| Rear Brake caliper insecurely mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
| Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Nearside Front Lower Shock absorber has a serious fluid leak fork seal (5.3.2 (b)) | 1 |
| Front Front position lamp insecure |1.1.1c| | 1 |
| Stop lamp not working hand and foot (4.3.1 (a) (ii)) | 1 |
| Horn not working |1.7.3a| | 1 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Offside Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Position lamp not working (4.2.1 (a)) | 1 |
| Headlamp not working on dipped beam main beam wired hi and low wrong way round correct wiring to head light |4.1.1 |a| |ii|| | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Offside Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Rear Footrest insecure (6.2.12 (a)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen No image (4.1.2 (a)) | 1 |
| Registration plate lamp issues | 1 |
| Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Front Brake component damaged and seriously reduced in strength |3.2.A1| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
| Rear Suspension attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
| Rear Valve stem seriously misaligned (5.2.3 (j)) | 1 |
| Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Fuel pipe union leaking |6.1.3 |b| |i|| | 1 |
| Front Brake cylinder leaking hydraulic fluid corrode at seal joint slow return |3.2.B1e| | 1 |
| Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Front Brake caliper damaged and braking performance affected (1.1.16 (a) (ii)) | 1 |
| Front Stop lamp does not illuminate immediately a brake applies not working |1.3.1a| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front Brake indicates excessive fluctuation of brake effort r/h disc warped |1.2.1 |e|| | 1 |
| Suspension arm pin or bush excessively worn swinging arm bush |5.3.4 |a| |i|| | 1 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Offside Front Upper Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Centre Front Front position lamp insecure |1.1.1c| | 1 |
| Brake performance unable to be tested Brake performance has not been tested due to excessively binding brake (Rear) (1.2.1 (g)) | 1 |
| Drive belt so worn it is likely to fail Teeth on belt are split (6.1.7 (c) (ii)) | 1 |
| Headlamp aim projected beam image obviously incorrect LED Bulbs fitted (4.1.2 (c)) | 1 |
| Stop lamp not working Both front and rear (4.3.1 (a) (ii)) | 1 |
| Drive belt worn to excess (6.1.7 (c) (i)) | 1 |