Most common failures | No# failures |
---|
Registration plate issues | 107 |
Headlamp aim out of alignment | 64 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 25 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 19 |
Rear reflector on motorcycle missing |1.4.1| | 17 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Riders seat insecure |6.2.1a| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Stop lamp remains on when the brakes are released | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Fuel tank insecure (6.1.3 (a) (i)) | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Steering operation linkage fouling when handlebars turned from lock to lock |2.1.4 |a|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Registration plate lamp issues | 1 |
Horn not working (7.7 (a)) | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Stop lamp not working Front brake light switch failed (4.3.1 (a) (ii)) | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front Direction indicator missing both |1.5.1a| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Exhaust markings indicating not for road use or similar wording |6.1.2 |c|| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d) | 1 |
Brake component is severely distorted (3.1.5) | 1 |
Drive belt excessively loose |6.1.7 |c| |i|| | 1 |
Direction indicator not working OSR |4.4.1 |a| |ii|| | 1 |
Brake disc significantly and obviously worn Front disc warped |1.1.14 |a| |i|| | 1 |
Brake indicates excessive fluctuation of brake effort Front brake |1.2.1 |e|| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Vehicle identification number obviously falsified black one fitted /replaced with correct yellow one (0.2 (b)) | 1 |
Nearside Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake component is excessively corroded |3.1.5| | 1 |
Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
An item not tested |Manual| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Stop lamp not working Front brake only (4.3.1 (a) (ii)) | 1 |
Brake hose excessively deteriorated | 1 |
Nearside Rear Braking system leaking from joint |3.6.A.1| | 1 |
Brake pipe excessively corroded | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |