| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 31 |
| Registration plate issues | 30 |
| Rear reflector on motorcycle missing |1.4.1| | 13 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 6 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear Position lamp not working (4.2.1 (a)) | 4 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Rear reflector missing |4.8.2 |a| |ii|| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Nearside Front Direction indicators not working |1.5.1c| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Horn not working |1.7.3a| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Stop lamp remains on when the brakes are released | 2 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 2 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Offside Front Direction indicator obscured |1.5.1a| | 1 |
| Brake disc|s| insecure Disk is attached to wheel hub and there is excessive free play. |3.2.A1g| | 1 |
| Front Steering lock stop missing |2.1.3| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Rear Brake component is excessively corroded |3.1.5| | 1 |
| Nearside Rear Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| An item not tested |Manual| | 1 |
| Headlamp aim beam image kick up to the offside lens fitted incorrectly |1.6| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Offside All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Central Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Headlamp aim not tested |4.1.2 |b|| | 1 |
| Front brake disc in such a condition that it is seriously weakened | 1 |
| Drive chain sprocket so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Front Front suspension assembly has an insecure fork brace |2.3.4d| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Nearside Brake lever has inadequate reserve travel front control |3.1.3b| | 1 |
| Direction indicator missing ALL |1.5.1a| | 1 |
| Direction indicator missing |1.5.1a| | 1 |
| Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Steering damper insecure |2.1.2d| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Upper All direction indicators not working On but not flashing, replace really |4.4.1 |a| |ii|| | 1 |
| Centre Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Lower Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Rear Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Nearside Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Offside Front Front wheel spindle loose |2.3.3a| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Rear Engine mounting/bracket bracket excessively loose |6.1.8 |a| |ii|| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Stop lamp not working control one (4.3.1 (a) (ii)) | 1 |
| Rear Stop lamp not working control two. (4.3.1 (a) (ii)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Direction indicator adversely affected by the operation of another lamp bringing on all indicators (4.4.3 (b)) | 1 |
| Exhaust markings indicating not for road use or similar wording stamped for closed circuit use only (6.1.2 (c)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator lens defective such that the emitted light is adversely affected rotating and loose (4.4.1 (b) (ii)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Front Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Registration plate lamp issues | 1 |
| Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
| Front Upper Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Front Lower Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear Suspension arm pin or bush excessively worn swinging arm (5.3.4 (a) (i)) | 1 |
| Nearside Handlebar fouling on the fuel tank or bodywork on full lock lock stop missing (2.1.4 (b)) | 1 |
| Brake hose excessively deteriorated | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls lever (4.3.2 (a) (iii)) | 1 |
| Front Shock absorber has a serious fluid leak stansion legs (5.3.2 (b)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Rear Lower Shock absorber insecurely attached bolt not through ny lock nut (5.3.2 (a) (i)) | 1 |