Most common failures | No# failures |
---|
Registration plate issues | 27 |
Headlamp aim out of alignment | 21 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Rear position lamp insecure |1.1.1c| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Horn not working |1.7.3a| | 2 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Offside Lower Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Headlamp damaged and function impaired Shell mounting bracket excessively corroded causing headlight to flicker |1.2.3a| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Lower Brake pipe excessively chafed |3.2.B2a| | 1 |
Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear All direction indicators obviously incorrectly positioned Rear not spaced 180mm apart. |4.4.3 |a|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Registration plate lamp issues | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Front Sidecar direction indicator insecure |1.5.3b| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Direction indicator missing all missing |1.5.1a| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Direction indicator obviously incorrectly positioned rear to close together (4.4.3 (a)) | 1 |
Exhaust markings indicating not for road use or similar wording (6.1.2 (c)) | 1 |
Front Stop lamp remains on when the brake is released (1.3.1e) | 1 |
Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
Stop lamp light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front Stop lamp not working brake control (4.3.1 (a) (ii)) | 1 |
Direction indicator obviously incorrectly positioned Rear indicators incorporated in rear light - to close together (4.4.3 (a)) | 1 |
Fuel tank leaking fuel tap (6.1.3 (b) (i)) | 1 |
Nearside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |