| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 32 |
| Registration plate issues | 30 |
| Rear reflector on motorcycle missing |1.4.1| | 13 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 5 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
| Horn not working |1.7.3a| | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 3 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Rear Footrest insecure |6.2.1a| | 2 |
| Offside Front Footrest insecure |6.2.1a| | 2 |
| Front Brake excessively binding |1.2.1 |f|| | 2 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Riders seat insecure |6.2.1a| | 2 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Horn not working (7.7 (a)) | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Offside Front Indicator tell tale not functioning |1.5.2| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
| Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Horn control defective |1.7.2a| | 1 |
| Rear reflector on sidecar missing |1.4.1| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Stop lamp not working Rear brake. |4.3.1 |a| |ii|| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Offside Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Offside Front Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Drive belt excessively tight |6.2.1d| | 1 |
| Stop lamp not working both controls (4.3.1 (a) (ii)) | 1 |
| Rear Brake caliper insecurely mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
| Stop lamp does not illuminate immediately a brake applies foot lever |1.3.1a| | 1 |
| Steering linkage locking device missing (2.1.3 (d)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Front Outer Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Exhaust markings indicating not for road use or similar wording (6.1.2 (c)) | 1 |
| Offside Rear Stop lamp does not illuminate by the operation of both brake controls Brake control 2 light switch inoperative. (4.3.2 (a) (iii)) | 1 |
| Registration plate lamp issues | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Stop lamp adversely affected by the operation of another lamp both (4.3.3 (b)) | 1 |
| Nearside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Brake component inadequately mounted front caliper mounted too close to disc (1.1.21 (c)) | 1 |
| Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Front Shock absorber has a serious fluid leak both (5.3.2 (b)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |