| Most common failures | No# failures |
|---|
| Registration plate issues | 15 |
| Headlamp aim out of alignment | 13 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Rear reflector on motorcycle missing |1.4.1| | 7 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Horn not working |1.7.3a| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 2 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Stop lamp does not illuminate immediately a brake applies front and rear |1.3.1a| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Brake hose excessively deteriorated | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Direction indicators not working all ooo |1.5.1c| | 1 |
| Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Offside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Exhaust system insecure (6.1.2 (a)) | 1 |
| Front Brake lever mounting insecure |3.1.2a| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Nearside Front Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Drive belt worn to excess |6.2.1e| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |