Most common failures | No# failures |
---|
Registration plate issues | 55 |
Rear reflector on motorcycle missing |1.4.1| | 21 |
Headlamp aim out of alignment | 18 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 15 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 9 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Horn is not a constant note |1.7.3c| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Drive belt excessively loose. |6.2.1d| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Stop lamp does not illuminate by the operation of both brake controls rear brake light switch not working (4.3.2 (a) (iii)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Rear Suspension component pin or bush excessively worn swingarm bearings excessive play |5.3.4 |a| |i|| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Brake component is severely distorted Rear disc warped |3.1.5| | 1 |
Stop lamp does not illuminate immediately a brake applies front lever opperation |1.3.1a| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Nearside Rear Upper Drive belt guard insecure |6.2.1c| | 1 |
Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Steering operation linkage fouling when handlebars turned from lock to lock Clutch cable catching on front mudguard! (2.1.4 (a)) | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Rear Footrest missing |6.2.12 |a|| | 1 |
Offside All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Central Rear Lower Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
Rear Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Front Headlamp aim beam image kick up to the offside headlamp has beam aim corrector fitted |1.6| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Brake component is severely distorted Disk |3.1.5| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Drive belt guard insecure |6.2.1c| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |