Most common failures | No# failures |
---|
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 15 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Steering headbearing has excessive free play |2.2.2| | 10 |
Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
Riders seat insecure |6.2.1a| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
Headlamp aim out of alignment | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Front Steering headbearing has excessive free play |2.2.2| | 5 |
Direction indicators not working |1.5.1c| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Headlamp aim not tested |1.6| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Front Direction indicators not working |1.5.1c| | 3 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear reflector on motorcycle obscured |1.4.1| | 3 |
Front suspension has inadequate damping effect. |2.3.6c| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Registration plate issues | 3 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 3 |
Horn not working |1.7.3a| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Rear Direction indicators not working |1.5.1c| | 2 |
Front Brake locking device missing |3.2.A1e| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 2 |
Rear Brake lever attachment screws loose |3.1.2b| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Front Brake component worn and seriously reduced in strength |3.2.A1| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Position lamp switch faulty |1.1.4a| | 1 |
Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Nearside Brake linkage excessively damaged |3.2.A1c| | 1 |
Direction indicator incorrect colour |1.5.1b| | 1 |
Front Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake locking device insecure |3.2.A1e| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Front Brake component damaged and seriously reduced in strength |3.2.A1| | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Rear Brake lever is inoperative |3.1.3c| | 1 |
Inner Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Horn control defective |1.7.2a| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Steering headbearing in such a condition that steering control is adversely affected Extremely loose (2.2.2 (f) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Fork yoke deformed |2.1.1b| | 1 |
Front suspension assembly component excessively bent |2.3.1| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
Rear Brake lever mounting cracked |3.1.2c| | 1 |
Front Headlamp switch faulty |1.2.4| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Centre Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Rear Brake lever insecure |3.1.2a| | 1 |
Front Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Front Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Offside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Front Front suspension assembly has excessive free play in the pivot bearings. |2.3.2| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |