Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 10 |
Headlamp aim out of alignment | 7 |
Drive chain excessively loose |6.2.1d| | 7 |
Horn not working |1.7.3a| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Headlamp insecure |1.2.3b| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear Direction indicator not working |1.5.1c| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Registration plate issues | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Brake component has an inadequate repair |3.1.5| | 1 |
Offside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Front Wheel damaged significantly reducing the original strength |4.2.1a| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Rear Wheel spoke cracked. |4.2.1b| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear position lamp obscured more than 50% |1.1.1d| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Brake pedal is inoperative |3.1.3c| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Centre Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Headlamp aim not tested |1.6| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Brake lever cannot be released smoothly |3.1.3d| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Brake component is excessively corroded caliper |3.1.5| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front wheel insecure |4.2.3b| | 1 |
Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |