Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Horn not working |1.7.3a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake pipe excessively chafed |3.2.B2a| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Steering movement excessively `notchy` with the wheel raised headbearings worn |2.2.1b| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Nearside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Offside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Horn control defective |1.7.2a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Rear Direction indicator missing |4.4.1 |a| |ii|| | 1 |
Nearside Rear Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Central Front Brake hose is likely to be fouled or trapped by moving parts chaffed through |3.2.B2c| | 1 |
Steering headbearing has excessive free play not free and knotchy |2.2.2| | 1 |
Fuel system component leaking valve above exhaust |7.2.1a| | 1 |
Headlamp aim not tested light not bright enough |1.6| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |